Frame Mounted Tie Downs that Fit 2011 Ford F-150 6.5' Bed with Factory Hitch

Question

Question:

I own a f150 ford pickup. 2011and want to purchase frame mount tie downs I want a complete kit. the truck has a 6 1/2-foot bead. it has a factory installed hitch and running boards along just the cab.

asked by: Stephen D

0

Expert Reply:

For Torklift camper tie downs that fit your 2011 Ford F-150 6-1/2 foot bed, with cab length boards, and a factory hitch you would want the part # TLF2014 and # TLF3005 and you'd be set. Or if you'd prefer an aluminum option that would be rust resistant you'd want the part # TLF2014A and # TLF3005A.

expert reply by: Jameson C

0

Answer 1

According to Lippert, the correct kit for your 2014 Ford F-150 is the: -HappiJac Truck-Mounted Camper Tie-Downs #LC182860. This kit includes 2 Front support braces, 2 Front brackets and anchors, 2 Rear brackets and anchors, and the mounting hardware…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 5

Hey Brady, Brophy in the past has told us that the tie downs part #HSWB don't have a weight capacity but you would want to make sure you use them only with campers that were designed to fit the bed length of the truck. The turnbuckles part #TDHP…

view full answer...

Answer 6

Good afternoon Ron, congrats on the new truck! Those are sweet. For your application with the 8 foot bed, OEM hitch, no running boards etc., you'll want the TorkLift Tie Downs - Custom Frame Mount - Front and Rear #TL87DR. They also come in…

view full answer...

Answer 7

Hello Mel, great question! Yes, the Torklift tie downs part #TL66FV will fit your 2006 GMC Sierra 2500HD crew cab with the 8 foot bed, provided your truck does not have running boards or cab length boards that extend under the bed, and you are not…

view full answer...

Frame Mounted Tie Downs that Fit 2011 Ford F-150 6.5' Bed with Factory Hitch

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching