Yakima LockNLoad Platform Rack Fitment on a 2021 GMC Yukon with OEM Crossbars

Question

Question:

Hi, I have two questions: 1 does the yakima lock n load platform rack come WITH crossbar clamps for pre-existing roof cross bars? 2 does the weight capacity of my rack increase if I add an additional cross-bar? I have a 2021 Yukon so I have the space. Thank you!

asked by: Philip P

0

Expert Reply:

I'm happy to help you out! I'll answer your questions in order:

1. Yes, the Yakima LockNLoad Platform Rack for Crossbars # Y45UV comes with universal crossbar clamps (see photo for example) that fit a variety of crossbar styles including the OEM bars on your 2021 GMC Yukon.

2. According to Yakima the LockNLoad can safely handle 165 lbs - 330 lbs depending on the setup, but since your OEM roof rack is only rated for 165 lbs that's what you'll want to abide by. You're more than welcome to add more crossbars but I doubt GM will say that increases the weight capacity of the roof rack - I know this is the case with the aftermarket crossbars.

Let me know if you have any other questions!

expert reply by: Jon G

0

Crossbar Clamps for Yakima LockNLoad Platform Rack
(click to enlarge)

Answer 1

The parts you need to build a Yakima HD roof rack kit for the flush rails on your 2021 GMC Yukon AT4 includes the following parts: 60" HD Crossbars - #Y01157 HD Bar SL Adapter - #Y03541 SightLine Towers - #Y64AR SightClip Fit Kit - #Y44UV Lock…

view full answer...

Answer 2

I have an answer for you. I reached out to my contact at Yakima and they said that they specially make t-slot hardware for accessories that are designed to fit into LockNLoad Platforms like the #Y05044-39. With that being said, there is no way to…

view full answer...

Answer 3

The Yakima Replacement Anchor Plate Style-A, Part #Y8810074, comes as a set of 8 plates that measure 3/4-inch x 7/8-inch. The centered threaded hole measures 0.2 inches (or 5.1 millimeters) in diameter. Please refer to the photo provided. The Yakima…

view full answer...

Answer 4

The Roof Rack System on your 2021 Yukon AT4 has a dynamic weight capacity of 220lbs. Dynamic weight capacity is the amount of weight it can handle in motion. So it can handle the roof top tent #TH8001KSK05 you have no problem. What you need to find…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hey Scott, thanks for reaching out! I don't have the exact height of that bracket, but the bolt from the Equal-i-zer #EQ64FR that sits on top of the trailer frame is 5/8" in and of itself so you're looking at around 1-1/4" at the…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hello Leslie, I looked up your previous orders and see that you ordered the #RRVA180B 71" Rhino Rack Vortex Crossbars back in 2023. I took a stroll out to the warehouse and was able to confirm that the mounting hardware #Y42XR for the Yakima…

view full answer...

Answer 11

Hi Dennis; you aren't going to find information on the static load listed from the roof rack manufacturers. Our general guidelines for tents like the Y79XR are that the roof rack must have a minimum load capacity of 165 lbs which this rack does…

view full answer...

Answer 12

Thanks for the picture Chris! The lift-brackets mount about 29" back from the center of the coupler on the Blue Ox SwayPro Weight Distribution w/ Sway Control item #BXW0553. It looks like your trailer's tongue isn't going to have…

view full answer...

Yakima LockNLoad Platform Rack Fitment on a 2021 GMC Yukon with OEM Crossbars

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching