Parts Needed to Convert Boat Trailer w/ 10 Inch Electric Drum Brakes To Hydraulic Disc With Oil Hubs
Updated 02/27/2023 | Published 02/25/2023
Products Featured in This Question
Question:
Hello I have a boat trailer with 10” drums and electric brakes. Is there a kit to convert to disc and oil bath hubs ? Thanks
asked by: Ron M
Expert Reply:
First you will want to verify exactly what size axle you have but it is most likely a 3,500LB axle. I recommend using a Digital Caliper # PTW80157 to verify the grease seal and bearing landing sizes on your spindle. A typical 3,500lb axle will use a Grease Seal # 58846 (1.719" ID), Inner Bearing # L68149 (1.378" ID) and Outer Bearing # L44649 (1.063" ID). If this is what you have here is a list of all the parts you will need for the hubs, otherwise please let me know your spindle dimensions so I can find you all the correct parts.
Stainless Steel Kodiak Disc Brake Kit # K2R35S qty 1
Stainless Steel Kodiak Trailer Hub # KH84545S qty 2
Inner Bearing # L68149 qty 2
Outer Bearing # L44649 qty 2
Kodiak XL ProLube Kit # XLPROLUBE1980KIT qty 1
Lug Nut # KALN1375S qty 10
We have the Kodiak Hydraulic Brake Line Kit in a 15' # 15SI-BLKIT or 18' # 18SI-BLKIT main line kit. You will need to select the correct kit based on where you plan to mount the Hydrastar Vented Marine Electric Over Hydraulic Actuator # HS481-8067. This actuator kit includes plug and play wiring to connect to a 7-way trailer connector. It also includes a control adapter module which will allow you to use a factory brake controller if your truck has this type of controller.
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Rotor
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Continue Researching
- Q&A: Looking To Replace Tie Down Engineering Brake Pads And Rotors
- Q&A: Replacement Brake Pad and Rotor for Kodiak Stainless Steel 10" Disc Brake Kit
- Q&A: Swing Away Tongue Kit For A 3" x 3" Trailer Tongue
- Q&A: Replacement Brake Calipers and Mounting Brackets for Load Rite Tandem Axle Trailer with 3.5K Alxes
- Q&A: Does The Kodiak Disc Brake Kit K2R35S Come With Lug Nuts?
- Q&A: Replacing the Shock Absorber on a Titan Model 60 Actuator
- Q&A: What Brake Pads Does Kodiak Disc Brake Kit # K2R35S Come With
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: How to Measure a Trailer Axle
- Article: Trailer Wiring Diagrams
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers