Correct Backing Plate for Tandem Axle Trailer Fenders for Enclosed Trailers 15 to 16 Wheels
Updated 02/13/2023 | Published 02/11/2023
Products Featured in This Question
Question:
On HP84VR, Does fenders a bend on flat side to allow for weld on backing plate. Also need backing plate to match fender.
asked by: Chuck P
1
Helpful Expert Reply:
Yes, there is a bend at the back end of the Tandem Axle Trailer Fenders for Enclosed Trailers # HP84VR.
To add a backing plate to these fenders you'll need the Backing Plate for Tandem Axle Trailer Fender # HP92FR and you'll be set!
Attached are some review videos for you to check out.
expert reply by:
Jon G
1
Product Page this Question was Asked From
Tandem Axle Trailer Fenders for Enclosed Trailers - Steel - 15" to 16" Wheels - Qty 2
- Trailer Fenders
- No Step
- 15 Inch Wheels
- 16 Inch Wheels
- 10-3/4 Inch Wide
- 72 Inch Long
- Steel
- Bolt-On
- Weld-On
- For Tandem-Axle Trailers
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Recommended 2.08 Diameter Grease Caps For Trailer
- Shop: EZ Lube Grease Caps with 1.99" OD - Fits 7" and 10" x 1-1/4" Dexter Hubs - Qty 2
- Shop: Trailer Hub Grease Cap with Rubber Plug, 2.72" - Drive-In for EZ Lube Axles - Qty 1
- Shop: Tandem Axle Trailer Fenders w/ Backing Plates - Steel - Qty 2
- Q&A: Where to Weld Tandem Axle Trailer Fenders w/ Backing Plates
- Q&A: Is There a Repair Kit for a 2-5/16" Trailer Coupler
- Q&A: Would The Rack'Em Heavy Duty Stake Pockets Work For Compact Tractor Tie Downs?
- Shop: etrailer Spare Tire Mount for Trailer with Angle-Iron Railing - Clamp On
- Shop: Tandem Axle Trailer Fenders - Rounded Edges - Steel - 14" to 15" Wheels - Qty 2
- Shop: Tandem Axle Trailer Fenders - Bolt Together - Steel - 14" to 15" Wheels - Qty 2
- Shop: Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole and Anchors, eZ-Latch - 2-5/16" Ball - 21K
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Q&A: Disc Brake Conversion Kit for a 5th Wheel Trailer w/ 7,000 lbs Axles
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: What are the Dimensions of a #99 Spindle
- Article: Trailer Wiring Diagrams
- Article: Double-Eye Trailer Suspension System Review
- Article: Trailer Lighting Requirements
- Article: Where to Position the Trailer Axle?
- Article: 7 Common Questions Everyone Has About Trailer Tires