Recommended 2.08 Diameter Grease Caps For Trailer
Updated 02/19/2014 | Published 02/16/2014
Products Featured in This Question
Question:
I took our trailer in to have the bearings re-packed, and they have had a difficult time finding replacement dust caps. They are 2.08 diameter, but the repair guy says they are also deepinch and cant find a dealer with the part. Any idea where I might find such a part? Thanks for your help!
asked by: Kira
Expert Reply:
We carry grease caps that fit a 2.08 diameter hub bore. Unfortunately, we do not carry dust caps with that diameter. The grease caps I recommend are Bearing Buddy, part # BB2080SS for non threaded hubs, and part # BB2080T-SS for hub bores that are 2.08 inch and that have 12 threads per inch. These seat into your hub and provide an easy way to protect your bearings from dirt and water,and makes adding grease to the bearings very quick and simple, with the included grease fitting.
I pulled a pair of these from our warehouse and have attached a photo that has some measurements for you. As you can see, the depth that the cap fits into the hub is .29 inches. The overall depth of the Bearing Buddy is 1.78 inches. These come packaged in pairs.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.06 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Bearing Buddy Bearing Protectors - Model 2080SS - Stainless Steel (Pair)
- Search Results: 244
- Shop: Bearing Buddy Bearing Protectors - Model 2717 - Chrome Plated (Pair)
- Shop: Bearing Buddy Bearing Protectors - Model 2080T-SS - Threaded - Stainless Steel (Pair)
- Shop: Bearing Buddy Bearing Protectors - Model 2717A w/ Auto Check - Chrome Plated (Pair)
- Search Results: wheel bearing dust cover
- Shop: Gooseneck Hitch
- Search Results: 195362
- Search Results: gorilla lift
- Search Results: wheel negative offset
- Search Results: 10~51
- Search Results: 10~56
- Shop: Spindle Grease Seal Set for LM48548 or L68149 Inner Bearing and 1.980, 1.968 or 2.562 Bearing Buddy
- Shop: Grease Seal
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Shop: Bearing Buddy Bearing Protectors - Model 2441SS - Stainless Steel (Pair)
- Q&A: Can Oil Bath Hubs be Converted to Grease Hubs
- Q&A: How to Convert Oil Bath Trailer Hubs to Grease Hubs
- Q&A: Can Regular Grease Trailer Hubs be Converted to Oil Bath Hubs
- Q&A: Replacement Grease Caps for a Trailer Hub with 2-1/16 Inch Hub Bore
- Video: Review of the Dexter Trailer Idler Hub Assembly for 3,500-lb Axles
- Q&A: Should a Chrome Hitch Ball Be Greased
- Q&A: Comparing 5 on 4-1/2" and 5 on 5" Trailer Wheels
- Article: Most Popular Wheel Bearings
- Article: How to Measure Your Trailer Wheel Bolt Pattern