Troubleshooting Tekonsha BRAKE-EVN Controller # TK63VR Not Working When Brake Pedal Is Pushed
Updated 02/01/2023 | Published 01/31/2023
Products Featured in This Question
Question:
I installed this brake controller #TK63VR and a 7-way plug #30717 on my 2017 Mini Cooper Countryman. I can confirm that the brake controller works when using the manual override. However, when testing the controller by pressing the brake pedal, it only works when the car is off and stops working after I turn the car on. Using a volt meter on the red wire connected to the brake controller, it shows 12.04 volts when the car is off and the brake pedal is pressed and then s down to 10.7 volts with the car running and brake pedal pressed. I can also confirm the line is 0 volts whenever the brake pedal is not pressed. Does the brake controller require a certain voltage on the red brake wire before activating and 10.7 volts isnt enough? Or could it be a faulty brake controller?
asked by: Matt C
Expert Reply:
Since the Tekonsha BRAKE-EVN Trailer Brake Controller # TK63VR is not getting 12 volts of power when the vehicle is running and pressing the brake pedal this is why the controller is not working. You can test for another wire on your brake switch that gives you the 12 volt output when the vehicle is running or we have the Roadmaster Universal Stop Light Switch Kit # RM-751000. This kit mounts to the brake pedal and will send 12 volt power to the controller when the pedal is pressed.
Product Page this Question was Asked From
Tekonsha BRAKE-EVN Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Plug-In
- Under-Dash Box
- Under-Dash
- Up to 4 Axles
- LED Display
- Single Trailer Only
- Tekonsha
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Hitch
- Video: K-Source Universal Towing Mirrors Road Test
- Video: K-Source Universal Dual Lens Towing Mirrors Spec Review
- Shop: Towing Mirrors
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: Trailer Wiring Harness Installation - 2013 Buick Enclave
- Video: Setting up the T-One Vehicle Wiring Harness for Factory Tow Package on a 2017 Buick Enclave
- Shop: Brake Controller
- Search Results: trailer wiring
- Shop: CIPA Custom Towing Mirror - Slip On - Driver Side
- Shop: K-Source Universal Towing Mirrors - Clip On - Convex Mirror - Qty 2
- Shop: K-Source Universal Dual Lens Towing Mirrors - Clip On - Pair
- Q&A: Locating the Brake Control Plug on a 2023 Nissan Frontier
- Video: Redarc Tow-Pro Elite Trailer Brake Controller Installation - 2022 Nissan Frontier
- Shop: Trailer Wiring
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Video: Installing the T-One Vehicle Wiring Harness on a 2024 Nissan Frontier
- Search Results: wiring harness flat tow wiring harness
- Search Results: tow wiring harness
- Q&A: What Causes PL and .c. Error Code on Tekonsha Prodigy P2 Brake Controller
- Q&A: Hitch and Wiring for 2023 Nissan Frontier Without Tow Package
- Q&A: Troubleshooting No Power on a Tekonsha Voyager Brake Controller
- Q&A: 2022 Nissan Frontier SV - Troubleshooting No Running Lights On Trailer
- Q&A: Potential Brake Controller Harness Location on a 2023 Nissan Frontier
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: T-One Vehicle Wiring Harness with 7-Way Trailer Connector
- Shop: Redarc Tow-Pro Elite Brake Controller - Dash Knob - Off-Road Mode - Up to 3 Axles - Proportional
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
on Trailer Brake Controller
