Correct Pin Box to Replace a Turning Point  

Hey Gregory, yes the Pullrite OEX SuperLite part #PUL89ZR that you referenced does work with the Rotaflex cushioned pin boxes with the lock in part number 4446 which we do not carry at this time.

For your 2020 Rockwood 5th Wheel, there aren't many options for an air ride pin box that is compatible to replace your current turning point pin box. I recommend Item #LC328492 which has an 18,000lb towing capacity and is the closest to…

Trailair Flex Air 5th Wheel Pin Boxes, such as the Lippert #LC328492, are designed to replace the existing pin box on your trailer. The long and short jaw models that you referenced in your question simply refer to the type of pin box that the unit…

Your correct set-up would depend on the length of your truck bed. If you have a 6-1/2 foot bed and a sliding hitch, the Ultra-Fab Trailair you referenced, part #LC179879 would dramatically improve your ride quality. This pin box is a direct…

We have checked in the past with Lippert and the correct replacement module for the 694656 that you have is the part #LC304136.

The MORyde pin box RSPB83-1622 is a 16K orbital rotating pin box designed for increased turning clearances with short bed trucks. Although this nice feature is not required for a long bed truck like your 2017 Ram 3500 I recommend keeping it. The…

Congrats on the new trailer and thanks for the picture and extra information! I just spoke with my rep at Lippert and it looks like your Jayco Eagle has a Lippert Turning Point which limits your options. The only gooseneck to 5th wheel adapter for…

I can confirm for you that there is a difference between the #BWRVK3300 and the #BWRVK3305 with the construction of the base of the hitch, which is where you get the difference in capacities between the two hitches. The 3300 is only rated for…

There are a couple of options that'll work great with your Lippert Turning Point Pin Box, however one hitch stands out to me more than others. Take a look at the: -Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs #C16115 This 5th…

If the B and W Companion hitch is the #BWRVK3600 which fits the OEM rail kit of a Ram truck it can be used with a pivoting pin box like the Turning Point but if the hitch attaches to a gooseneck hitch via a center post then it can not be used with it…

I checked with GEN-Y and they were able to get me the distance from the top bolt hole of the #GY48GR down to the bottom of the coupler which you can see in the attached picture as well as a few other dimensions. It's 23.8 inches. It does not come…

Thanks for the pictures and congrats on the trailer! To replace your Turning Point pin box you will want the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item #GY48GR. This is the only gooseneck pin box that fits the mounting points for…