Size of Spindle Nut Included with Redline # RG05-100 Spindle Nut Kit

Question

Question:

Is the rg05-100 for a 1inch axle? Dont see the size in the description.

asked by: Marc H

1

Helpful Expert Reply:

The Spindle Nut in the Redline # RG05-100 has a 1 inch inside diameter and a 14 thread per inch thread pitch.

I am in the process of having this information added to the product description.

expert reply by: Mike L

1

John I.

3/17/2020

Very good except what size of socket is for the nut?

Chris R.

3/17/2020

You would need a 1-1/4" socket or wrench to tighten the castle nut. Just keep in mind that it's not something you want to actually torque down, but instead simply tighten until there's no longer any side to side play in the hub.

Answer 1

Yes, for this you will want to use the Dexter Trailer Axle with Electric Brakes part #8327826-EB. This axle assembly has a 6,000 lb capacity with an 86-1/2" hub face to hub face measurement and a 71-1/2" spring center to spring center…

view full answer...

Answer 2

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…

view full answer...

Answer 6

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 7

Hey Larry! Yes, the Onan Generator - QG 7000i Onboard RV Generator #CM44MR is capable of using a remote start. For a standard setup, you can use a switch like #CM86RR along with an extension harness #CM26RR. You can also use the EC-AGS+ Auto…

view full answer...

Answer 8

Hey Lauris! Is the Brinkley prepped for a generator or are you saying it has room for one? If it doesn't have some kind of generator prep you're going to need a lot of parts from Cummins to install #CM44MR. You will have to add a fuel tank,…

view full answer...

Answer 9

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 10

Hey Shawn! Yes, the B&W 5th Wheel to Gooseneck Pin Box #BW23RV does include safety chains. That is one of the first things we asked them when they came by to show us the new pin box. They also throw in replacement hardware so you're covered…

view full answer...

Answer 11

Hey Tom, congrats on the new truck. So long as your PullRite SuperGlide 2900 5th Wheel Hitch mounts to industry standard 5th wheel rails like item #PUL63RR you will be able to use the Adapter Rails item #PUL69RR to mount this hitch in the puck system…

view full answer...

Answer 12

Hey Edwin! If the listed dry tongue weight is 1,330 lbs you will likely be over the rating of your current SwayPro spring bars. You'll probably be adding 150-200 lbs with the propane and batteries, but that does depend on the number of propane…

view full answer...

Size of Spindle Nut Included with Redline # RG05-100 Spindle Nut Kit

Product Page this Question was Asked From

Continue Researching