Replacement Yoke Latch for Heartland Trailer with 8,000 Lb Coupler
Published 01/19/2023
Question:
I have a 2014 Heartland Trailer. I need JUST a 2 8000lb. replacement yoke with the pin and latch assembly. Please Advise. Thanks,
asked by: Michael L
Helpful Expert Reply:
I do have an option for you but if your trailer coupler is worn or damaged it's unfortunately not as simple as replacing the latching mechanism. The entire coupler must be replaced and for this I recommend the A-Frame Trailer Coupler part # CA-5210-B. This coupler requires welding so you will need to have the old one cut off and the new one welded-on. If you do not feel comfortable doing this, I recommend professional installation. This coupler has an 8,000 lb weight capacity and is designed for a 2-5/16" hitch ball.
Product Page this Question was Asked From
A-Frame Trailer Coupler - Yoke Latch - Black - 2" Ball - Weld On - 8,000 lbs
- A-Frame Trailer Coupler
- Standard Coupler
- 50-Degree Frame
- Weld-On
- 8000 lbs GTW
- 2 Inch Ball Coupler
- Yoke Latch
- 2-1/4 Inch Hole
- Standard Grade
- etrailer
more information >
Continue Researching
- Video: Installing the etrailer Easy Grease Trailer Idler Hub Assembly
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel - Qty 2
- Q&A: Correct Replacement for TDE Trailer Idler Hub 46210
- Shop: Dexter Boat Trailer Axle - 89" Long - Galvanized
- Q&A: How Do I Determine What Bearing Sizes I Need For My Trailer
- Q&A: Hub Assembly Recommendation for Ranger Trail Boat Trailer
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Search Results: trailer tires and wheels
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Shop: Trailer Wiring
- Video: Measuring To Choose The Right Trailer Axle
- Search Results: trailer wiring
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Video: Hands-On with the Hub Saver Hub and Wheel Protector
- Shop: Suspension Enhancement
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
- Shop: Brake Controller
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Article: Trailer Lighting Requirements
- Search Results: trailer jack
on A-Frame Trailer Coupler
