Replacement Toilet Recommendation For A Sealand 110 Toilet

Question

Question:

I am looking to replace my model 110 SeaLand toilet. Do you have a replacement that will bolt up and work in place of it.

asked by: Harold C

0

Expert Reply:

For your Sealand 110 Toilet, you can use the:

-Dometic 510 Full-Timer RV Toilet # DOM29FR.

This toilet will work as a great replacement for your current toilet, measures 19-1/2" tall, 20-1/4" long, and has base dimensions of 10-3/4" long x 8-3/16" wide.

Attached is an installation video for you to check out as well.

expert reply by: Bryce D

0

Kerry

7/1/2025

I am looking to replace my model 110 SeaLand toilet seat. Do you have a replacement that will bolt up and work in place of it.

Nick S.

7/2/2025

@Kerry Hey Kerry, the correct replacement seat for your 110 Sealand Toilet is going to be # DOM25FR. The original seat was discontinued and switched to this Dometic seat as replacements. The title shows it as a tan color but the actual color of the seat is bone.

Answer 1

We have the low profile, semi-recessed Glantastic LED RV Puck Light, #328-K-58L34P9. You do not mention what the dimensions are on your current Jupiter lights, I searched online and from what I was able to find think they may be a similar 4-1/4"…

view full answer...

Answer 2

The SAE STIAP2 04 DOT number you provided is a DOT approval number, which states that the lens is compliant with DOT regulations. Because of that, that number isn't typically a good identifier for finding a replacement lens. However, in this…

view full answer...

Answer 3

In order to find the model number on the Furrion 2-in-1 Range Oven part #FSRE21SABL you will need to pull this out away from the cabinets and then look on the left hand side of the unit for a white sticker with barcode which should then display the…

view full answer...

Answer 4

Since RBW is no longer in business it is a bit difficult to find any information on their hitches. In order to determine if we have rails that will work for your RBW UHS-85-7 Fifth Wheel you will need to take some measurements of the fifth…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Replacement Toilet Recommendation For A Sealand 110 Toilet

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching