Air Lift LoadLifter 5000 that Fits 2022 Toyota Tundra SR5 with 1 inch Lift

Question

Question:

I have a 2022 Tundra SR5, 4wd Crew Max. No TRD package. I had a 1inch spacer lift installed on the rear coil spacer. Will this work with a 1inch coil spacer installed?

asked by: Dan F

0

Expert Reply:

The Air Lift LoadLifter 5000 kit part # AL84JQ is a fit for your 2022 Toyota Tundra SR5 and since the lift is only a 1 inch lift there isn't a spacer kit as the smallest is 2 inches. The kit would still work just fine though.

expert reply by: Jameson C

0

Answer 1

Hi Larry; you can use both Air Lift and Firestone air bags as long as you don't have the factory Air Suspension system. I recommend the Firestone #F89VV since they have a more durable construction which makes them far more reliable. With that…

view full answer...

Answer 2

Yes, for your 2024 Toyota Tundra using the Air Lift LoadLifter 5000 Air Helper Springs #AL84JQ you're going to need the Air Lift Universal Air Spring Spacers for LoadLifter 5000 and 7500XL #AL52420 so the bags aren't being pulled apart.

view full answer...

Answer 3

Hey Chris, along with the Air Lift LoadLifter 5000 Air Helper Springs #AL84JQ, you're also going to need the spacers #AL52420 so the bags aren't being pulled.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 8

Hey Chad, Good question and you will need spacers for your 2024 Toyota Tundra with the factory lift when installing the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers #AL24JQ. The rear lift on the Tundra is 2 inches…

view full answer...

Answer 9

Hey Nick, yes I would say that the Curt TruTrack 2P Weight Distribution System #C67ZV is rated too high for your Jayco Jayfeather. This has a tongue weight range of 800-1,000 lbs and you'd most likely have a tongue weight around 640 to 750 lb.…

view full answer...

Answer 10

Hey Brooks, we are located near St. Louis, MO in the US and we can ship to Canada. The K-Source tow mirrors part #KS48NQ are a confirmed fit for your 2026 Toyota Tundra TRD as well.

view full answer...

Air Lift LoadLifter 5000 that Fits 2022 Toyota Tundra SR5 with 1 inch Lift

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching