How To Bleed Brakes Using Demco DA20 Hydraulic Brake Actuator

Question

Question:

Firs of all I bought the Demco 20 ton unit and realized ther is no installation manual, Can I have one sent to me? And if you don’t have one , how can your company think that is a good idea?

asked by: Thomas S

0

Expert Reply:

I have attached for you below a photo which goes over the bleeding procedure for the Demco Hydraulic Brake Actuator part # DM8204311. I have also emailed you a copy of the installation instructions straight from Demco's site.

expert reply by: Conner L

0

How To Bleed Brakes Using Demco DA20 Hydraulic Brake Actuator
(click to enlarge)

Answer 1

Hey Erik, unofficially I have a solution for that with the Bright Way Trailer Breakaway kit part #3802336. This is a pretty small battery in a box you could run your converter box to instead of all the way up to the vehicle battery but I have to…

view full answer...

Answer 2

First you will need to remove the old hydraulic equipment. Remove the surge coupler or actuator, remove all the lines, and finally remove the brake assemblies. If you have 10 inch diameter hub and drums, you may need to replace those as well. If you…

view full answer...

Answer 3

There is a pin that keeps the hitch ball(s) in place on the platform. If you remove the platform of your Rapid Hitch adjustable ball mount then you can see and easily remove the pin to remove the hitch ball(s). I have linked a review video for the…

view full answer...

Answer 4

Replacement master cylinders will be brand specific, so they cannot be mixed and matched. As an example, the Titan master cylinder #T2374600 will only fit their Model 10 and Model 20, and the Demco master cylinder #5650 will only fit their drum…

view full answer...

Answer 5

Hello Sophie, we sure do! For your Dexter DX12.5 actuator you can use the following reverse lockout solenoid: - Replacement Solenoid Valve for Dexter Brake Actuators with Reverse Lockouts #T4748800

view full answer...

Answer 6

The replacement Titan actuator for your Model 10 with part number 3241639 is listed on our site as the Titan Zinc-Plated Brake Actuator w/ Drop, Electric Lockout #T4750620. My contact at Titan confirmed this.

view full answer...

Answer 7

Hey Jeff, The specs you are looking for on that B & W tongue weight scale, #BW34KR, are below. Since this is a brand new item from B & W there is no earlier date to get this yet as it is set to release fall of 2025. The over all capacity of…

view full answer...

Answer 8

Hey Andy, The closest direct replacement we have for your Titan is the Dexter #T4750600. This has the same drop head as your titan and uses the same bolt pattern to install. I looked up your Titan 10 and the Dexter is rated for a higher weight…

view full answer...

Answer 9

If you are looking for replacement hubs for your boat trailer, we offer lots of great solutions. The Trailer Idler Hub Assembly #AKIHUB-655-6-EZ-K is a great kit that includes everything you need to replace your 82655 hub. The bearings ( #25580 for…

view full answer...

Answer 10

In order to convert a Dexter 10K Axle (Made After May 2013) from electric drum to hydraulic disc brakes you'll need the following: Kodiak Disc Brake Kit part #K2R1058D11E (1 per Axle) Dexter Oil Hub for 9K to 10K General Duty Axles part…

view full answer...

Answer 11

Hey Joshua, we have the Roadmaster Direct Connect base plate kit part #RM62EQ that is a confirmed fit for your 2024 Ford F-350. You'd need a higher rated tow bar like the Nighthawk part #RM-676 since your truck is heavier. For lighting you can…

view full answer...

How To Bleed Brakes Using Demco DA20 Hydraulic Brake Actuator

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching