Can The Factory Receiver On a 2017 RAM 1500 Be Replaced With a Stronger Class IV Receiver?

Question

Question:

I need a class IV hitch for my trailer that has a tongue weight of 675 pounds. My Factory hitch is not rated that high. The hitch is welded on. Can I cut it off and install a replacement class IV hitch?

asked by: Jim B

0

Expert Reply:

To install a receiver like the Curt Trailer Hitch Receiver # 14374 your 2017 Ram 1500 you will have to remove the factory rear bumper along with the receiver. The Curt and other aftermarket receivers are designed to fit the factory class III rear bumper. Do note you will also need to ensure your Ram can handle the additional weight. Your local Ram dealer will be able to help you determine if your truck will be capable of supporting the additional tongue weight and trailer weight.

expert reply by: Bud M

0

Answer 1

The Curt hitch part #13333 is rated for use with weight distribution systems. This hitch has a capacity of 6,000 lb trailer weight without a WD system and then with a WD system is rated for up to 10,000 lbs. Either way it would have capacity for a…

view full answer...

Answer 2

For your 1995 Dodge Ram 2500 with 8' bed, I recommend the Extang Trifecta 2.0 Soft Tonneau Cover #EX92575. This cover is a Tri-fold, vinyl cover that has a rail-free design, and it includes a self-contained, easy-to-use clamping system for fast…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Doug welcome back! To replace your Dometic Duo-Therm 57915.331, I recommend the Advent Air RV Air Conditioner System item #ADV92SR in white or item #ADV62SR in black. There's no way to just replace your AC unit, you'll need to replace all…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey David, it sounds like you know what you're doing but I've also gone ahead and found the wiring diagram for the Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR for you to check out so you can use it as a cross…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Can The Factory Receiver On a 2017 RAM 1500 Be Replaced With a Stronger Class IV Receiver?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching