Correct Backing Plate for Tandem Axle Teardrop Trailer Fenders - 14" to 15" Wheels

Question

Question:

I am looking to order the HP44VR fenders and wanting to know what is the correct backing plate for this fender. thanks.

asked by: Rick

0

Expert Reply:

The correct backing for the Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers part # HP44VR is the Backing Plate for Tandem Axle Trailer Fender part # HP82FR. Please note, this will need to be tack welded to the backside of the fender.

expert reply by: Conner L

0

Answer 1

When replacing your fenders you want to do your best to match the dimensions to what you currently have. Typically you won't find an exact match to the current fenders. Based on my research it looks like you have a tandem axle trailer with…

view full answer...

Answer 2

We have a couple tandem trailer fenders that are 10-3/4 inches wide like with the part #HP84VR and the #HP74VR which are both 72 inches in length but at the 68 inch length of the #HP64VR

view full answer...

Answer 3

The Tandem Axle Teardrop Trailer Fenders part #HP44VR which are 66" long measure 9" wide. I have attached a photo below.

view full answer...

Answer 4

When replacing fenders you want to do your best to match the dimensions of your old fenders. Although it is slightly taller, the #HP44VR is going to be the closest match to what you previously had. These measure 66" long x 9" wide x…

view full answer...

Answer 5

The Backing Plate for Tandem Axle Trailer Fender #HP82FR you mention is the correct backing plate for both the Tandem Axle Teardrop Trailer Fenders - Rounded Edges #HP94VR and the Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers #HP44VR.

view full answer...

Answer 6

Hey Kai! Is the Loadstar ST215/75D14 Bias Trailer Tire with 14" Galvanized Wheel #AM3S560 that you recently purchased from us (thank you, by the way) for your Shorelandr trailer? If so, we have the Fulton fenders in Silver #F008594-2 and White…

view full answer...

Answer 7

Hey Phil, thanks for reaching out! What are the dimensions of the fenders you need to replace? I appreciate you sharing your VIN, but unfortunately I'm not able to get any info like the fender size from it. If you can let me know what dimensions,…

view full answer...

Answer 8

Hello Billy, thanks for reaching out. We may have a fender that will work for you, but there is no way to look up your trailer to know exactly which fender you have now. Trailer manufacturers just aren't that specific with their online…

view full answer...

Answer 9

The CE Smith Single Axle Trailer Fenders #CE19504-2 were never intended to be mounted in this type of fashion, but it looks like it could be doable but will require modification. I recommend considering install some Steel Tandem Fenders #HP44VR.…

view full answer...

Answer 10

The trailer running light fuse of your 2018 Chevy Silverado is in the number 15 slot of the fuse box under the hood of your truck. I attached a picture with the location pointed out.

view full answer...

Answer 11

Hello David, Congrats on the new RAV4!! What is your new favorite feature? The Curt hitch #C66KR will not work for your car because it is the Plug-in Hybrid, you had 2025 Toyota RAV4 put in the fit guide, but you have the PHEV (Plug-in Hybrid…

view full answer...

Correct Backing Plate for Tandem Axle Teardrop Trailer Fenders - 14" to 15" Wheels

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching