Trailer Hitch for a 2013 Honda Civic SI Sedan

Updated 12/12/2013 | Published 12/10/2013

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

(242)

$191.14

Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1

(666)

$16.01

1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs

(2621)

$16.53

2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs

(2621)

$18.47

Hopkins Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit

(17)

$69.98

Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs

(2274)

$50.10

Pin and Clip for 1-1/4" Hitches - 1/2" Diameter

(895)

$11.49

Question:

I need to know if you have or are going to have a hitch for the 2013 civic si sedan?

asked by: Kent R

Expert Reply:

I did some digging and found that the Curt trailer hitch # C11391 does fit the 2013 Honda Civic Sedan si model so you can use it. I have included a link to the installation instructions for you.

If you will be using the hitch for something like a bike rack or cargo carrier you will need to make sure that the accessory is rated for use on a Class I trailer hitch. Class I trailer hitches are limited to 2 bikes maximum. Curt recommends the use of a stabilization strap, # 18050, for all non-trailer loads to reduce the stress on the hitch.

If you plan on doing some towing you will want to first consult the owners manual for towing information. You will also need a ball mount, # C45521, and pin and clip, # PC2. For a 1-7/8 inch ball use # 19256 and for a 2 inch use # 19258. For trailer wiring use # 46365.