bing tracking image
  1. Trailer Hitch Ball
  2. Draw-Tite
  3. Trailer Hitch Ball
  4. 1-7/8 Inch Diameter Ball
  5. 3/4 Inch Diameter Shank
  6. Standard Ball
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
Draw-Tite

1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs

Part Number: 19256
In Stock
$16.66
Trailer Hitch Ball
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Durable, cold-forged steel ball has a 3/4" diameter x 1-9/16" long shank. Built-in wrench flats ease installation. Chrome finish resists corrosion. Fine threads provide strong grip. Lock washer and nut included. Great Prices for the best trailer hitch ball from Draw-Tite. 1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs part number 19256 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (2553)
  • Q & A (0)
  • Videos (2)
  • Photos

Draw-Tite Trailer Hitch Ball - 19256

  • Trailer Hitch Ball
  • 1-7/8 Inch Diameter Ball
  • 3/4 Inch Diameter Shank
  • Standard Ball
  • 2000 lbs GTW
  • Class I
  • Class II
  • Chrome-Plated Steel
  • 1-9/16 Inch Shank Length
  • Draw-Tite

Durable, cold-forged steel ball has a 3/4" diameter x 1-9/16" long shank. Built-in wrench flats ease installation. Chrome finish resists corrosion. Fine threads provide strong grip. Lock washer and nut included.


Features:

  • Hitch ball provides a connection point for your trailer's coupler
  • Fine threads provide exceptionally tight, strong grip
  • Cold-forged steel is strong and durable
  • Corrosion-resistant chrome finish
  • Built-in wrench flats make it easy to hold ball in place while tightening the nut
  • Lock washer and nut included


Specs:

  • Ball diameter: 1-7/8"
  • Shank dimensions: 3/4" diameter x 1-9/16" long
  • Weight capacity: 2,000 lbs
  • Fits ball mount platforms 3/8" to 5/8" thick
  • Limited lifetime warranty


63810 Draw-Tite 1-7/8" Diameter Hitch Ball with Short Shank - 2,000 lbs GTW - Chrome




California residents: click here


Video of 1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for 1-7/8" Hitch Ball: The Breakdown

Today, we're going to be taking a look at Draw-Tite's one and seven eighths inch hitch ball with a three quarter inch shank. This ball is designed to work with both Class I and Class II hitches. With a maximum towing capacity of 2000 pounds, that makes it perfect for our Class I trailer here that also accepts a one and seven eighths inch ball. We can just slide it down on there and it snaps in place keeping it nice and secure. This ball mount is going to be ideal for small utility trailers like this for if you just need to get some things moved around or maybe you're helping a buddy move and you just need to have some extra space. And it's also great for recreational activities like hauling around some dirt bikes or possibly some small jet skis or ATVs.

Our ball is constructed of a cold forged steel with a chrome plating to give it a nice appearance and also to protect it against corrosion.Now that we've gone over some of the features, let's show you how to get it mounted up onto your ball mount. Now that you got your ball, you are going to need a ball mount for it. You'll want to choose one with the appropriate drop that matches your trailer so you'll have a nice level towing experience. That'll just provide better tongue weight and transitioning of the weight onto your vehicle. We'll now need to take our ball, we're going to put it in our ball mount.

You'll want to choose if you want it in the drop or rise position. We're going to be placing ours in the rise position, so that way when it's in our trailer, it raises it up. Place the included lock washer on the back, followed by the nut. We'll then want to clamp our ball into our vice here. And then we can tighten it down to the specifications included with your ball.When you're ready to use the ball mount, you simply slide it into your one and a quarter inch receiver matching up the hole with the ball mount in the hole in the hitch.

We'll then take the included half inch hitch pin and clip to secure it to our receiver. And we're now ready to attach our trailer to it. And that completes our look at Draw-Tite's one and seven eighths inch hitch ball with a three quarter inch shank.

Customer Satisfaction Score:


Customer Reviews

1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs - 19256

Average Customer Rating:  4.8 out of 5 stars   (2553 Customer Reviews)

Durable, cold-forged steel ball has a 3/4" diameter x 1-9/16" long shank. Built-in wrench flats ease installation. Chrome finish resists corrosion. Fine threads provide strong grip. Lock washer and nut included.

by:

What's to say? It works great.



by:

good quality



by:

Fit perfectly. Easy to install.



by:

Exactly what I needed.



by:

Excellent item!!!!!



by:

You shipping is incredibly fast!



by:

Right size.



by:

Solid construction. Quality detail.



by:

Good Quality



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:

very pleased,AWESOME shipping time.



by:



by:

Nice part for good price.


25
2536
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch Ball

  • Recommended Hitch for a 2023 Toyota Corolla Hybrid Sedan
    For your 2023 Toyota Corolla Hybrid Sedan, I recommend the Curt Trailer Hitch item # C34UR. This hitch is custom fit and bolts to your Corolla with included hardware. This is a class I hitch with a 1-1/4" receiver. It has a 2,000 lbs towing capacity and a 200 lbs maximum tongue weight. This is the highest capacity hitch available for your car. I have linked an installation video below along with a picture so you can see what this hitch looks like installed. If you are planning on towing...
    view full answer...
    Image 1 for
  • Hitch for 2020 Volkswagen Golf for Towing Small Motorcycle Trailer
    For lighter duty vehicles like your 2020 Volkswagen Golf a 1-1/4 inch hitch like the Curt part # C11412 would be your best option for towing a smaller trailer. You'll also need trailer wiring like part # 118646, ball mount # 3593, and hitch ball # 19256. If you have a GTI model, the Stealth Hitch # SH79ZR is a 2" but you cannot use to tow, the EcoHitch Stealth Trailer Hitch Receiver is also a 2" # 306-X7375 that is confirmed to fit the GTI. If you do not have the GTI model, then there...
    view full answer...
  • 1-78 Inch Diameter Hitch Ball With Internal Threads For Fastening
    The 1-7/8" Hitch Ball with Internal Thread - 3/4" Diameter x 2" Long Shank - Chrome - 2K # EI1C-C has course threads and is the only internal thread hitch ball we carry. If there is a fine thread option with internal threads, we unfortunately have not seen it. If you want fine threads for the same diameter shank and ball, then I recommend the standard style hitch ball # 19256.
    view full answer...
  • Trailer Hitch Recommendation for a 2012 Chrysler 200 Convertible
    There is a confirmed fit for a 2012 Chrysler 200 convertible and it is Curt Hitch # C11133. The Draw-Tite hitch is not yet a confirmed fit. The Curt hitch comes with the correct ball mount, hitch pin, and clip. For a ball you can use # 19256 for 1-7/8 inch diameter or # 19258 for a 2 inch diameter. For trailer wiring, use the Vehicle Wiring Harness, # C56211. I have included a link to the installation instructions for the hitch and for the wiring harness for you.
    view full answer...
  • Trailer Hitch Fit for a 2020 Toyota Corolla
    We actually do have a trailer hitch for your 2020 Toyota Corolla Sedan! It is the Class I Draw-Tite Sportframe Trailer Hitch Receiver # 24983 and it has a 1-1/4" hitch receiver. You did refer to this as a tow hitch so if you planned on using this trailer hitch for towing you also need some wiring and a ball mount kit. I recommend the Tekonsha T-One # 118810 for wiring because of how reliable it is and that it bypasses your OEM wiring so you know your vehicle is protected. For a ball mount...
    view full answer...
  • Hitch Recommendation for a 2014 Subaru Impreza WRX Hatchback
    The only hitch we offer for your 2014 Subaru Impreza WRX hatchback is the Curt hitch part # C11120 that is a Class I 1-1/4 inch hitch. 2 inch hitches are reserved for larger vehicles like SUVs and trucks. I attached a help article on hitch sizes and classifications for you to check out as well.
    view full answer...
  • Trailer Coupler Will Not Release Hitch Ball Even After Lubrication
    I see you have tried the usual fixes for a coupler that won't release the hitch ball - moving the vehicle slightly to potentially release excess tension on the ball, lubrication with WD-40 and even a little brute force with the pry bar. You can also first make sure the trailer is supported, and then remove the hitch pin from the ball mount and move the truck forward. This will ensure there is little or no tension on the ball/coupler. This will also give you more room to work and free up...
    view full answer...
  • Trailer Hitch Recommendation for 2018 Volkswagen Tiguan
    The etrailer Class III hitch part # e43ZR is a confirmed fit for your 2018 Volkswagen Tiguan and would be a great option. It has a 3,500 lb trailer towing capacity as well. For a ball mount you'd want the part # 36051, hitch ball # 19258 for a 2 inch ball or part # 19256 for 1-7/8 inch ball. For trailer wiring you'd then want the part # 118811 which is a confirmed fit.
    view full answer...
  • How Tight Should Trailer Coupler Be on Hitch Ball
    A little bit of play is acceptable, the coupler should be tight enough that the coupler won't come off the ball, but not so tight you can't close the latch. I typically tighten the coupler up until I feel a slight resistance when closing the coupler latch, then I'll back it off slightly from there. Reese sells a white lithium grease that's conveniently packaged for use on hitch balls, part # 58117.
    view full answer...
  • Visibility of the Curt Class I Hitch on a 2009 Volvo S40
    We have not had a chance to install this hitch on a vehicle like your 2009 Volvo S40, but I spoke with my contact at Curt and he said the majority of this trailer hitch will not be visible. The top of the receiver will sit flush with the bottom of your bumper fascia. He did mention that you may be able to see the bottom part of the mounting arms that extend just past the crossbar on both sides. I have attached installation instructions for you to check out. If you plan on doing any light...
    view full answer...
    Image 1 for
  • Trailer Hitch, Wiring and Ball Mount for 2017 Ford Mustang
    There is a potential way for you to haul an electric wheelchair with a 2017 Ford Mustang, although there is not an adapter that is going to work. The reason for that is there is just one 1-1/4 inch to 2 inch adapter with rise that works with a Class I hitch, and that adapter, the Brophy # HT5R, has a 5 inch rise, which doesn't meet your needs. Additionally, the use of any adapter will reduce the weight capacity of your hitch by 50 percent, and since there are only Class I hitches with a...
    view full answer...
    Image 1 for
  • What is the Best Wiring Harness for a 2018 Toyota Corolla iM?
    The best plug and play wiring harness for a 2018 Toyota Corolla iM is the Curt item # C56309. Curt makes some of the best and most reliable wiring harnesses in the towing business. Multiple manufactures use them as suppliers of their OEM towing harnesses. The Curt item # C56309 has a custom-fit T-connector that plugs into your Corolla's wiring harness, which is located behind the tail lights. It will provide you with a 4-flat connector that will power your trailer or accessories lighting...
    view full answer...
  • Does the Muffler Have to be Removed to Install a Trailer Hitch on a 2005 Scion xB
    According to the installation instructions for CURT Trailer Hitch, # 11487, you will not need to remove the muffler in order to install the hitch on your 2005 Scion xB. I have included a link to the installation instructions for you to view. The hitch comes with a ball mount, hitch pin, and clip. If you plan to do some towing you will need a ball, # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter). For trailer wiring, use Curt Wiring Harness, # C56030. I have included a link to...
    view full answer...
  • Recommended Hitch for a 2024 Honda Accord
    To add a hitch to your 2024 Honda Accord, I recommend the Draw-Tite item # DT86PR. This hitch is custom fit and bolts to your Honda with included hardware. It is a class I hitch with a 1-1/4" receiver that has a 2,000 lbs towing capacity and a 200 lbs maximum tongue weight. If you are planning on towing you will also need a wiring harness item # 118776 and the Draw-Tite Drawbar item # 3593 and then for hitch balls item # 19258 for a 2 inch ball or item # 19256 for a 1-7/8 inch ball.
    view full answer...
  • Trailer Hitch Recommendation for a 2015 Ford Fusion
    Long story short you would need a trailer to transport a heavy duty power scooter with a 2015 Ford Fusion. The highest rated hitch we offer for your vehicle is the Curt part # C12091 that has a 350 lb tongue weight rating which doesn't sound like it would be enough when you consider the weight of the carrier as well. This hitch would work well to tow a light trailer with though. For a ball mount you would want the part # C45016, hitch ball # 19256 for 1-7/8 inch and part # 19258 for 2...
    view full answer...
  • Trailer Hitch, Accessories, and Wiring for a 2006 Suzuki Forenza
    Curt trailer hitch # C11481 will fit a 2004 to 2008 Suzuki Forenza so it will also fit your 2006. If you plan on doing any towing with this vehicle be sure to consult the owners manual to make sure it can tow and to determine the vehicle capacity. The correct ball mount is # C45521 and you can use pin and clip # PC2. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring use # 119178KIT. I have linked instructions for the wiring and the hitch for you.
    view full answer...
  • What Size Bolts are Used to Install a Trailer Hitch on a 2010 Toyota Matrix
    If you look at the instructions for Curt hitch # 12228 which I have linked for you, the bolt size used is M12-1.25 x 30mm. This is a 12mm bolt. This is the size that fits the factory weld nuts on the 2010 Toyota Matrix. Sometimes the weld nuts can get packed with grime or corrosion and it will seem like the bolts are too large to fit. We have a video and an FAQ article which I have linked for you that shows how to clean out the weld nuts to get the hardware to fit properly. If you plan...
    view full answer...
  • Is Bumper Trimming Required to Install Curt Trailer Hitch C11286 on a 2013 Subaru Impreza Hatchback
    I am not sure why the Impreza in the video has a large cut out in the bumper. It was a customer vehicle and they may have had something else installed there at some point. Trimming is not required for installation of hitch # C11286. I have included a link to the instructions so you can see for yourself that trimming the bumper is not needed to install the hitch. For trailer wiring use # 118573 for a non-WRX/STi wagon. I have linked instructions for the wiring as well. The hitch comes...
    view full answer...
  • Trailer Hitch for 2015 Tesla Model S for Carrying Bike Rack or Towing
    What year Model S do you have?
    view full answer...
  • Trailer Hitch and Wiring for a 2012 Toyota Camry to Move a 370 Pound Scooter
    I do have a solution for you but using just a hitch-mounted carrier will not work. In order to carry a scooter on a trailer hitch mounted carrier both the trailer hitch and the vehicle would have to have a tongue weight capacity greater than the combined weight of the scooter and the carrier. The trailer hitch with the highest tongue weight capacity that fits your 2012 Toyota Camry is # C12107. This hitch tops out at 350 pounds tongue weight so you would have to carry the scooter another...
    view full answer...
  • What is the Best Hitch for a 2013 Hyundai Sonata Hybrid?
    The best hitch for your 2013 Hyundai Sonata Hybrid is going to be the Draw-Tite item # 24965. This hitch is custom fit for the hybrid models and bolts to your car with included hardware. It is the strongest and safest hitch available for your Sonata. I have linked an installation video below to help you get it set up. Since you are planning on towing you will also need a wiring harness item # C59236 and the Draw-Tite Drawbar item # 3593 and then for hitch balls item # 19258 for a 2...
    view full answer...
  • Recommended Trailer Hitch For 2008 Toyota Camry SE V6
    Yes, we do have a hitch that will fit your 2008 Toyota Camry SE V6, but the item you selected, Curt Trailer Hitch, part # 12343, will not fit the SE model of the Camry. I would recommend the Draw-Tite Trailer Hitch Receiver, part # 36416, which is a Class II 1-1/4 Inch Hitch. To complete your towing setup you may be interested in the following: Draw-Tite Ball Mount, part # 36071 1-7/8 Inch Hitch Ball, part # 19256 2 Inch Hitch Ball, part # 19258 Pin and Clip, part # PC2 T-One Vehicle Wiring...
    view full answer...
    Image 1 for
  • Trailer Hitch, Wiring Harness and Ball Mount Recommendation for 2018 Toyota Corolla
    I took a look at an online copy of the owner's manual for a 2018 Toyota Corolla and it simply states that towing a trailer is not recommended with the vehicle so the decision will ultimately be up to you. If you do decide to use your '18 Corolla to pull your jet ski you will need a trailer hitch, wiring harness, ball mount and hitch ball. The trailer hitch I highly recommend for your '18 Corolla is the Draw-Tite Trailer Hitch # 24913 because it is a bolt-on installation that will not require...
    view full answer...
    Image 1 for
  • Trailer Hitch for 2013 Nissan Altima Sedan that Does Not Require Drilling to Install
    The Curt # C11352 and Draw-Tite # 24796 require drilling in order to install on a 2013 Altima sedan. If you're needing the hitch as an attachment point for a bike rack or other hitch mounted accessory, I'd recommend the Draw-Tite # 24796. If your owner's manual or Nissan says it's okay to tow with your Altima, you might also need the following: A ball mount Trailer wiring harness, part # 118470 2 inch trailer ball, part # 19258 1-7/8 inch trailer ball, part # 19256 Locking hitch pin,...
    view full answer...


< Previous
123. . .81



Do you have a question about this Trailer Hitch Ball?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeff D
Installed by:
Jeff D
Employee David F
Installed by:
David F
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Brian T
Updated by:
Brian T
Employee Dustin K
Video by:
Dustin K
Employee Chris R
Video Edited:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.