Available Replacement Parts for 50 Amp Hughes Autoformers Voltage Booster with Surge Protection

Question

Question:

Hughes RV220-50-SP Autotransformer Where are replacement parts on your web site?

asked by: Roger

0

Expert Reply:

The only replacement part we have for the 50 Amp Hughes Autoformers Voltage Booster with Surge Protection HU57FR is the Replacement Surge Protector # HU26FR.

We do have some other accessories though which I'm linking for you to filter through.

expert reply by: Jon G

0

Answer 1

Hey Ray thanks for the picture! That exhaust tip pointing down is going to go a long ways in dissipating the heat from your diesel engine. The attachment point for the Roadmaster Tow Defender Protective Screen for Tow Bars with Quick Disconnects item…

view full answer...

Answer 2

Great question, Dirk! Both the 30A and the 50A Hughes Autoformers have built in surge protectors so you won't need to have a separate surge protector installed. If the Autoformers does have to deal with a surge situation we have a replacement…

view full answer...

Answer 3

Hey Bud. It doesn't say you can't put the Watchdog Power Center Surge Protector and Voltage Booster item #HU74ZR on its back but you are going to block some of the ventilation. The unit does warm up and it will shut off if the internal…

view full answer...

Answer 4

Hi Tom, I reached out to the manufacturer of the Power Watchdog Surge Protector with Bluetooth and Emergency Shut Down - Hardwired - 50 Amp #HU27FR who said they need to be installed between your power cord and the transfer switch. They said the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Available Replacement Parts for 50 Amp Hughes Autoformers Voltage Booster with Surge Protection

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching