Solution for Replacement Arm for Dometic Awning.

Question

Question:

Looking for a left arm to a domestic awning.

asked by: Mike L

0

Expert Reply:

I do have a solution, but we do not offer a left arm for your Dometic awning. What we do have is the Solera Classic Universal Awning Support Arms # LC434720 for 81" - 96" arms, or # LC434718 for 68" - 81" arms. These universal support arms are designed to replace the existing arms on Dometic awnings. You can use the kit to replace both arms on your Dometic awning system.

expert reply by: Robin H

0

Answer 1

In order to convert a Dometic power awning to manual you would need a new set of arms, the Solera Classic Universal Awning Support Arms for RVs part #LC434718 will work well for this. All you would need to do is remove the old roll tube and fabric…

view full answer...

Answer 2

Great question Mark, thanks for the details! Your WFCO WF-8955PEC-GE power center uses a removable converter section and the #WF76FR is the direct replacement main board assembly. It has WFCO's Auto Detect technology, which automatically switches…

view full answer...

Answer 3

When deciding if it's best to go with a larger arm for your awning, you'll need to go by the actual awning/fabric extension instead of arm length. As long as that's good, you can use larger awning arm kits like the: -Solera Classic…

view full answer...

Answer 4

To change over the Dometic power awning Mfd #916ft13.501U to a manual operation and keep the arms black you will want to use the Solera Classic Universal Awning Support Arms for RVs item #LC434717. This kit is designed to replace the existing support…

view full answer...

Answer 5

For your 2006 Keystone Everest 364Q, with a 20' awning, you can use the: -Solera Classic Universal Awning Support Arms for RVs - 68" to 81" Arms - White #LC434718, -Solera Classic Universal Awning Support Arms for RVs - 81" to…

view full answer...

Answer 6

The Solera Classic Universal Awning Support Arms #LC434720 is designed to replace the arms and springs on your manual Dometic awning. You must have between 81"-96" in height between the top awning rail and where the bottom bracket mounts on…

view full answer...

Answer 7

We do have manual support arms available in white for a Solera awning roller assembly like your Solera RV Awning Roller Assembly - 16' Wide - Black Fade #LCV000211486. In order to choose the right one, what you want to do is measure how much…

view full answer...

Answer 8

The Solera Awning part #LC434718 that you referenced has varying lengths between 68 and 81 inches which allows for varying pitch options which is when the awning is open. I don't see how this would cause you to lose ground clearance.

view full answer...

Answer 9

The correct replacement option depends on the length of the arms that you are replacing. The arm length of 68 inches to 81 inches is the range that the Solera Classic Universal Awning Support Arms will replace. So if you have a spring-loaded manual…

view full answer...

Answer 10

For your Dometic awning we have the Solera Classic Universal Awning Support Arms in White #LC434718 or Black #LC434717 that should work great as replacements. These are designed for Dometic systems like yours and they do not include a motor. I do…

view full answer...

Answer 11

For Lippert awning arms that will work with your manual Dometic awning we have the Solera Classic Universal Awning Support Arms for RVs #LC434718. These will work for you if you have 68"-81" of height between the top awning rail and the…

view full answer...

Answer 12

I do have an option for you but you can't use a Solera Awning Head with Carefree Awning Arms. The arms and head must both match but you can use a Solera Awning Head/Arms with a Carefree Awning Roller Tube/Fabric. For this, the Solera Classic…

view full answer...

Solution for Replacement Arm for Dometic Awning.

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching