How To Set Correct Output Torque On Torque Multiplier Lug Nut Tool with Extension Bar and Handle

Question

Question:

Can I use a torque wrench when tightening and set it for 8 ft-lbs to get the correct nut torque of 450-500?

asked by: Ws

0

Expert Reply:

The Torque Multiplier Lug Nut Tool with Extension Bar and Handle part # PT87RR has a 58:1 torque ratio so every 1 ft. lb. of torque applied to the tool will result in 58 ft. lbs. of force exerted. For example, if you set a torque wrench to 8 ft. lbs. and used this on the multiple it would exert around 464 ft. lbs. Please note, there will be some variation in torque due to both the accuracy of the torque wrench and multiplier.

expert reply by: Conner L

0

Answer 1

Hey Joe, you would need a carrier like the Roadmaster Hitch Spare Tire Mount #RM-195225 instead, which can fit all bolt patterns and 16" - 24-1/2" wheels. The #e98ZR woulnd't be able to work with the bolt pattern you'd have on your…

view full answer...

Answer 2

Curt decided not to design hitch #C13068 to account for those welded on pieces you referenced in order to maximize the size of the side hitch brackets. As to why they chose to go with a 5 bolt design I can't say. The Draw-Tite hitch #75270 sounds…

view full answer...

Answer 3

Hey Matt, welcome back! The Rock Tamers Adjustable Mud Flap #RT67VR is designed for a 2" receiver. The factory hitch on your 2024 GMC Sierra 3500 is 2-1/2" so you need the #ERT00110 instead. If you want the option with the screen that would…

view full answer...

Answer 4

A factory 7-way trailer connector isn't all you need to power a trailer's electric brakes. You still need a brake controller. Some Ford F-150s are equipped with a factory integrated brake controller, which you may have. If your 2012 Ford…

view full answer...

Answer 5

If you have a working 4 pin trailer connector and a boat trailer with surge brakes, then you will not need a 4-pin wiring harness. If your trailers 5-pin connector is the flat style you can use the 4 Pole to 5 Pole Trailer Wiring Adapter, part…

view full answer...

Answer 6

You would have to purchase the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black, #BWTS10037B as a complete hitch assembly to upgrade to the 2 inch and 2-5/16 inch ball. The different size ball…

view full answer...

Answer 7

According to the instructions for the Bulldog Velocity Series Electric Landing Gear Jack #BD185400 there are 2 ways to install this jack; you can either use at least four 1/2" grade 5 bolts, or four U-Bolts. There are no adapters to make this…

view full answer...

How To Set Correct Output Torque On Torque Multiplier Lug Nut Tool with Extension Bar and Handle

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching