Replacement Bearing Kit For Trailer With Bearing Size 25MM Inner Diameter
Updated 10/11/2022 | Published 10/10/2022
Products Featured in This Question
Question:
Hello, I have trailer with bearing size of 25 mm id 52 mm od by 13 mm width. Would you have bearing kit to match this? Thank you
asked by: Robert
0
Expert Reply:
Based on your dimensions it sounds like your trailer is using the Hub Bearing # L44643. This has an inner diameter of 1" or 25.4mm and a width of 0.58" or 14.732mm and the Race # L44610 has an outer diameter of 1.98" or 50.292mm. These are the parts included in the Bearing Kit # BK1-100.
Be sure to verify the Grease Seal # 34823 (inner diameter 1.249", outer diameter 1.983") dimensions with your current seal.
expert reply by:
Bud M
0
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.00 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: What Is The Span Or Usable Length Of RV Designer Hitch Pin - 1/2" # RD83GR
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacing A 125255UC Double Lip Grease Seal
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Can 12" Dexter Axle 6K Electric Trailer Brakes Be Replaced By 12" dexter Axle 7K Brakes
- Q&A: Best Replacement Brakes for a 7,000 lbs Axle
- Q&A: Should There Be a Washer Between Outer Bearing and Castle Nut on etrailer 2,000 lb Trailer Axle
- Article: Trailer Wiring Diagrams
- Article: 5 Things to Know About Weight Distribution Hitches