Can The Bumper Fascia On a 2022 Lexus RX 350 Be Trimmed With a Razor Blade?

Updated 10/03/2022 | Published 10/01/2022

Products Featured in This Question

Mounting Bracket 4-Pole Flat

(6190)

$10.86

Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector

(454)

$28.57

Question:

Can a razor blade cutter cut thru the bumper cover I don’t have the Dremel tool used in your video

asked by: Richard

Expert Reply:

It is very difficult and dangerous to try to trim the fascia on your 2022 Lexus RX 350 using a razor blade when you install the Draw-Tite Max-Frame Trailer Hitch Receiver # 75540. Since you have to trim the rear fascia as well as a couple panels under your Lexus to install the receiver you have a couple options. First you can take your Lexus to a service center before you install the receiver to have the panels trimmed per the manufacturer instructions that are linked below. You can also pickup a small hacksaw from a local hardware store that will allow you to cutout all the panels needed.

I do recommend installing the 4-Way Harness # 56083 when you install the receiver. This will make it easier to secure it in place using the Mounting Brackets # 18140 & # 18144 directly to the crossbar on the receiver.

expert reply by: Bud M