Can B and W Headache Rack Fit Under Crossover Tool Box

Question

Question:

Will The BandW Headache Rack work with a tool box that sits on the bed rails? 2003 Dodge 2500 Long Bed

asked by: Kirk D

1

Helpful Expert Reply:

Yes, we have seen people fit crossover style tool boxes like you have on top of the B and W Headache Rack part # BWPUCP7520BA that you referenced. You'd need to position the box so that the lid can still open though.

expert reply by: Jameson C

1

Answer 1

The B&W Custom Headache Rack w/ LED Brake, Turn, Tail Lights is only available is white part #BWPUCP7520WA or black part #BWPUCP7520BA. B&W does not produce this ladder rack with a chrome or stainless finish.

view full answer...

Answer 2

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 8

Yes Bryan, HappiJacs says "Power drill with 1/2" hex socket can be used to raise or lower jacks when not bearing weight". Another thing you can do for the HappiJac Manual Truck Camper Jack System - 34-1/2" Lift - 8,800 lbs…

view full answer...

Answer 9

Dexter recommends a SAE 90, SAE 80W-90 or SAE 75W-90 oil to be used. I recommend the Kodiak Synthetic Bearing Oil for Oil Bath Hubs #XLPROLUBE as it is a synthetic 90 weight oil that helps reduce friction and to keep bearings cool. Since your cap was…

view full answer...

Answer 10

Hey Steven, yes the Curt gooseneck hitch part #C44NQ does fit your 2019 Ford F-250 that has the brackets on the frame rails already for the OEM gooseneck hitch.

view full answer...

Can B and W Headache Rack Fit Under Crossover Tool Box

Continue Researching