Troubleshooting Lippert Ground Control 3.0 Front Left Leg Not Retracting Completely

Published 09/22/2022

Products Featured in This Question

Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad - 4-Point Set

(123)

$3414.16

Replacement Lead Leg for Lippert Components Ground Control 3.0 Electric Leveling System - Qty 1

(145)

$541.82

Replacement Hall Effect Motor for Lippert Components Ground Control 3.0 Leveling System

(46)

$505.20

Question:

Left front won’t retract all the way.

asked by: David G

Expert Reply:

Is the jack retracting at all? The Lippert Ground Control 3.0 # LC358590 front jacks should be retracting all the way under normal operation so if one of them isn't then you need to try retracting it manually by removing the plug on the motor and using a 5/16" socket to raise and lower the leg.

If manual operation works just fine then that tells me the issue is the motor and it needs to be replaced with part # LC343758. If you're finding problems operating the jack manually then you likely need to replace the whole leg with part # LC305340 instead.

If you can give me some more insight I can help you troubleshoot further. Attached are some review videos for you to check out.

expert reply by: Jon G