Replacement Trailer Hub/Drum For A LCI35-SB-86.5-68.5-NOSP-OS-L-655-7278-30PT-3-GAWR
Updated 09/20/2022 | Published 09/19/2022
Products Featured in This Question
Question:
I need help identifying the correct replacement hub/drum assembly for the following LCI axle: Model # LCI35-SB-86.5-68.5-NOSP-OS-L-655-7278-30PT-3-GAWR 4400# and Serial # 045-004084983. Thanks
asked by: Durham J
Expert Reply:
When it comes to replacing hub/drum assembly on your LCI axle model # LCI35-SB-86.5-68.5-NOSP-OS-L-655-7278-30PT-3-GAWR you will need The Trailer Hub and Drum Assembly # AKHD-655-35-EZ-K.
The hub/drum has a sturdy iron construction and includes Inner Bearing # L68149 and Outer Bearing # L44649. The hub has a 6 on 5-1/2 inch bolt pattern, and is compatible with standard axles from most manufacturers, including Dexter and Lippert (LCI).
The bearings, races, grease seal, grease cap, and lug nuts are included. If you need new brakes these hubs work with 10 inch brake assemblies like The Dexter Electric Trailer Brake Kit # K23-462-463-00.
I attached a review video link below.
Product Page this Question was Asked From
Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Trailer Suspension Parts
- Suspension Bolts
- Camper
- Car Hauler
- Utility Trailer
- 9/16 Inch Diameter
- 3 Inch Long
- ABS Fasteners
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: furrion chill cube
- Search Results: bk2 100 bearing kit
- Search Results: cre3000
- Search Results: chill cube heat pump
- Search Results: facr18vsda~ps~am
- Search Results: moryde cre3000
- Search Results: trailer leaf springs
- Q&A: Does etrailer Carry Furrion Chill Cube w/ Heat Pump to Replace Dometic Duo-Therm
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Wiring Diagram for the Dometic Replacement Single Zone Thermostat
- Q&A: Replacement Bearings and Seals for Lippert 4,400 Lb Axle
- Video: A Closer Look at the Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Hub Bearing Kit 3500LB Axle - BK2-100
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Dometic Digital Thermostat - Furnace Control Only - White
- Shop: Furrion Adapter Wiring Kit for Coleman, Dometic, or Advent Air RV AC Units - R410a
- Shop: 4-Leaf Double-Eye Spring for 4,400-lb Trailer Axles - 25-1/4" Long
- Shop: Dexter Bearing Kit for 4.4K Axles - Inner and Outer Bearings LM67048/L68149
- Video: Lippert Electric Trailer Brakes Feature Review
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Q&A: Replacement Bearings for Lippert 4,400 lb Axle
- Video: Stromberg Carlson Electric Trailer Jack Review
- Q&A: Is The Membrane Over A Lippert Smart Jack Control Panel Replaceable
- Q&A: Battery Box That Can fit 4 100AH 12v GC2 Battle Born Lithium Batteries
- Shop: Mud Flaps
- Video: Review of Lippert Camper Jacks - Smart Jack with Footplate - LC643589
- Video: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles: The Breakdown
- Article: How to Accurately Measure Trailer Leaf Springs