What Is the Outer Tube Length of the Reese Electric 5th Wheel Landing Gear Set

Question

Question:

I have placed an order for these but they don’t indicate the tube length I need 33 1/2 inch tubes from what I’ve been told. I am Going to be replacing my original setup on my 07 holiday rambler next level fifth wheel 37ft long

asked by: Gabriel

0

Expert Reply:

In order to confirm fit you'll simply need to measure the weld stop spacing of the tabs on the trailer and so long as they are 15-1/2" inside to inside or 17-1/2" outside to outside then the Reese Electric 5th Wheel Landing Gear Set part # RP500708 should fit. The outer tube length is 29-1/2" but it has a drop leg so the overall extended length is 73-1/2" and the overall retracted length is 37-3/4".

expert reply by: Conner L

0

Answer 1

Hey Bob, Landing gear components aren't all interchangeable between brands so I'd need to know the exact model to find replacement parts for your current system. If you're just wanting to replace the landing gear as a whole then I'll…

view full answer...

Answer 2

To determine the correct replacement landing gear for your 5th wheel trailer, you will need to measure the mounting brackets on your trailer from the underside of the top bracket to the top of the lower bracket as shown in the diagram. From there you…

view full answer...

Answer 3

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 4

I have a few different options for you depending on the route you would like to take. However, regardless of which route you pursue you will need to take some measurements of your outer jack tube length and weld stop spacing. If you are handy and the…

view full answer...

Answer 5

There are a few things that go into making sure you choose the correct replacement landing gear. First you need to be sure that the landing gear is rated properly. If you check out the weight rating on your current landing gear just make sure the…

view full answer...

Answer 6

Hi Shaun, I can definitely help with that. From what we typically see on the 2020 Forest River Wolfpack 365PACK16, the most common landing gear setup is the Lippert/Venture style system with 33-1/2 inch outer tubes and 15-1/2 inch inside-to-inside…

view full answer...

What Is the Outer Tube Length of the Reese Electric 5th Wheel Landing Gear Set

Continue Researching