Rear Suspension Enhancement For a 2019 Mercedes-Benz Sprinter 2500 To Reduce Sway and Sag

Question

Question:

I just purchased a 2019 mercedes sprinter 2500 and am going to be putting a 1000 lb steamer and a 250 gallon water tank and am just looking for a little less squat and sway.

asked by: Adam L

0

Expert Reply:

I have a couple options for you that are application specific for your 2019 Mercedes-Benz Sprinter 2500. These are the systems for the different types of drive and suspension types I recommend using.

First the RoadActive Suspension Custom Leaf Spring Enhancement Kit # RAS3620 fits 2wd vans that have a single blade rear leaf spring.

Finally the SumoSprings Rebel Custom Helper Springs # SSR-327-40-2 fits 4wd vans.

expert reply by: Bud M

0

Answer 1

The highest rated trailer hitch we have for a 2018 Mercedes-Benz Sprinter 2500 4x4 with 170" Wheelbase is the Curt Trailer Hitch Receiver part #13358 if you have the factory step bumper which is rated for 5,000 lbs gross trailer weight and 500…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Hi JME; the Furrion Chill Cube Remote only works with the AC unit. It cannot operate a furnace. The ADB #LC64DX works with any duct style. Since this is a ducted setup you will need one of the following systems: -Furrion Chill Cube RV Air Conditioner…

view full answer...

Answer 7

Hey Tony! I'm going to save you a lot of trouble here. The Chill Cube Thermostat #LC74DX is absolutely terrible. We have had nothing but issues with this, and there has been endless back and forth with Furrion about it. Some people are able to…

view full answer...

Answer 8

Hey Derrick! The Dometic RV Furnace #DMC94RR will pretty much work with any RV thermostat that is capable of running a furnace. The only one that might give you trouble is the Furrion Chill Cube wall thermostat since it seems to have issues with a…

view full answer...

Answer 9

The trailer wiring harness part #119250KIT is a universal install trailer wiring harness that will also work on your 2015 Mercedes-Benz Sprinter. I attached an install video that shows it being installed on a 2014 Sprinter just like yours.

view full answer...

Rear Suspension Enhancement For a 2019 Mercedes-Benz Sprinter 2500 To Reduce Sway and Sag

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching