HappiJac Qwik-Load Compatibility With TorkLift Basic SpringLoad Turnbuckles

Question

Question:

I currently am using the Torklift Basic Spring load turnbuckles to anchor our truck camper. By using threaded eye bolts and threaded rod, would the Happijac kit for turnbuckles be compatible with the spring-loaded barrel, could the two be used together? Thank You.

asked by: David V

0

Expert Reply:

Yes, the HappiJac Qwik-Load Upgrade Kit # LC182894 will work with the TorkLift Basic SpringLoad Turnbuckles # TLS9000. The HappiJac kit fits 1/2" threaded rods like what the TorkLift kit uses.

expert reply by: Bud M

0

Answer 1

Both the Erickson Tie Down Anchors, part #EM01003 and the Putco Push-Up Tie-Downs, part #P99901, are not designed to be used to hold down campers. The capacity of the Erickson Tie Down Anchors, part #EM01003, is 1,000 lbs. For a camper tie downs, I…

view full answer...

Answer 2

Hi Dennis; the HappiJac Truck-Mounted Camper Tie-Downs #LC182906 are designed for certain Chevy/GMC trucks. There are none available for your 2020 Ford F-350. If you can let me know your bed length and hitch style I can check to see what fits. I also…

view full answer...

Answer 3

You can use the Brophy Clamp On Camper Tie-Downs #HSAB for your 2018 Ford F-350 Super Duty but we actually recommend going with the Camper Tie-Downs #HSSF instead as they have a slightly different design that better fits your Super Duty. Attached are…

view full answer...

Answer 4

Hey Jim, so the Happijac camper tie down kit part #LC182910-182971 that fits your 2005 Ford F-250 actually comes with the stabilizer bar so you would not need to purchase that separately. If you needed a replacement though the correct part number is…

view full answer...

Answer 5

Hey Brandon, The TorkLift Tie Downs #TL93VV has the correct front tie-down, but the incorrect rear tie-down for your F-350. You would need the TorkLift #TL38PR instead. to complete the setup you'll also need some turnbuckles like the TorkLift…

view full answer...

Answer 6

Yes, you'll need the TorkLift Talon Camper Tie-Downs - Front #TL36CR and rear #TLF3008A. To secure your camper to the tie-downs you can use the TorkLift AnchorGuard Derringer Turnbuckles for Truck Camper Tie-Downs #TLS9020

view full answer...

Answer 7

According to HappiJack, their turnbuckles that the #LC182894 are meant to be used with do not carry a weight rating or a capacity. When the turnbuckles are installed properly, they are designed to have sufficient capacity to handle the weight of any…

view full answer...

Answer 8

The HappiJac Qwik-Load Upgrade Kit for Standard Turnbuckles part #LC182894 is an excellent upgrade option for the HappiJac Original Turnbuckles for Camper Tie-Downs part #LC182898. These are going to cut down dramatically on the time it takes to…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

HappiJac Qwik-Load Compatibility With TorkLift Basic SpringLoad Turnbuckles

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching