Troubleshooting Trailer Error When Using Curt Echo Under-Dash Controller on 2020 Honda Ridgeline

Updated 08/02/2022 | Published 07/31/2022

Products Featured in This Question

Curt Echo Under-Dash Bluetooth Brake Controller w/ OneControl App - Up to 4 Axles - Proportional

(65)

$329.95

Curt Echo Wireless Brake Controller - 7-Way Plug-in w/ Bluetooth App - Up to 2 Axles - Proportional

(1803)

$289.95

Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In

(61)

$14.48

Question:

i had the Curt Echo Wireless Trailer Brake Controller - 1 to 2 Axles - Proportional Item # C51180 On my 2013 Honda Pilot and it worked great. Then changed Vehicle to 2020 Honda Ridgline. I complained about battery on vehicle. I purchased Curt Echo Under-Dash Trailer Brake Controller - Bluetooth C27JR-C51392. Installed. Using same trailer a All lighting works but brakes give electrical error and dont work. I do not have a battery on trailer 12 volt pin is not connected in t way connector. the error complains that trailer wiring is incorrect. Thanks

asked by: Dave W

Expert Reply:

Thank you for all of the info!

The Curt Echo Wireless Trailer Brake Controller # C51180 just requires the trailer lights and 12V power pin to operate properly but the Curt Echo Under-Dash Trailer Brake Controller # C27JR and Custom Wiring Adapter # C51392 require your 2020 Honda Ridgeline to have the tow package so all of the wiring exists on your 7-Way - especially the brake control pin in the 5 o'clock position (see attached).

If you grab a tester and put it on that pin and then apply the Curt Echo brakes manually you should see power on this pin. If you don't then something is going on with the wiring from the controller back to the 7-Way on your Ridgeline and you need to look for any damage or disconnected pieces.

If you do get power on that pin then the issue is somewhere on your trailer and you'll want to check your connectors and wiring to make sure everything is properly secured and in good condition.

expert reply by: Jon G