How Long Take to Charge Two 105 Amp Rated Batteries w Progressive Dynamics Charger PD9145ALV

Question

Question:

I’m putting 2 105 amp hr lithium batteries an replacing old converter that was 45 lead battery charger.will this charger be sufficient? Al roughly how long will it take to charge batteries Thanks

asked by: Craig C

0

Expert Reply:

Since your battery bank would essentially be rated for 210 amps the 45 amp rated Progressive Dynamics Inteli-Power RV Converter and Battery Charger # PD9145ALV that you referenced would fully charge both of them in about 4 hours or so. But that would be if the batteries were totally dead which most likely wouldn't be very often.

expert reply by: Jameson C

0

Answer 1

Hey Shane, the IOTA IDP-30 was a 30 amp distribution panel like the Progressive Dynamics 5000 Series AC/DC Distribution Panel #PD94MR that you referenced so this would be a great option to replace what you have. Did yours stop working?

view full answer...

Answer 2

I wish we had what you are looking for but we only have straight connectors with the Smartplug inlet connector kits like the part #SM46FR that you referenced.

view full answer...

Answer 3

Hello Paul, thanks for reaching out. For the 30 amp SmartPlugs, I am not seeing they offer one with a 90-degree connector. They would all be straight plugs like the part #SM77FR you were looking at.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 12

Welcome back Adam. I can indeed tell you what gooseneck adapter you'll need for your 5th wheel trailer but I'll need the information on the sticker that's attached to the bracket above your current pin box. The white sticker should say…

view full answer...

How Long Take to Charge Two 105 Amp Rated Batteries w Progressive Dynamics Charger PD9145ALV

Continue Researching