Trailer Hitch For A 2022 Kia Sorento SX Prestige AWD

Question

Question:

Need hitch fir 2022 Sorento clime SX Prestige AWD. Fir bike rack. Would have dealer install when I pickup vehicke. Which would you recommend? Probably not towing with.

asked by: Dennis K

0

Answer 1

For your 2022 Kia Sorento the hitch I recommend is the Curt part #C34ER as it's mostly hidden like you are wanting and it has the better towing capacities. Only the hitch opening hangs below the rear bumper which helps make it less visible as…

view full answer...

Answer 2

Hello Nolan; the #e98843 fits the 2016-2020 models of the Sorento. You will need a different hitch since there have been changes to the frame that won't allow the old one to fit. We don't have an etrailer hitch for the 2022 but you can use…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

Hey Eric, yes the Curt hitch part #C37RV does fit the PHEV versions of the 2026 Kia Sorento like you have so it would work great. I attached a picture of a review from a customer that installed it on a PHEV for you to check out as well. Are you…

view full answer...

Answer 8

He Jason, all three of the hitches for the 2026 Hyundai Santa Fe that we offer are really solid options. We have the Curt #C37RV, the etrailer #e24ZV, and the #TowSmart part #TS44ZR. Overall the designs are incredibly similar so they are all going to…

view full answer...

Answer 9

Hi Richard! Yes, the Curt Trailer Hitch Receiver #C37RV will fit your 2026 Santa Fe Hybrid. The installation process will be the same. We actually installed this on a 2025 hybrid so you can use that as a guide. I attached a link to the video further…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Trailer Hitch For A 2022 Kia Sorento SX Prestige AWD

Featured Help Information

Miscellaneous Media

Continue Researching