How to Change Spring Center on e65GR Trailer Axle

Updated 07/18/2022 | Published 07/14/2022

Products Featured in This Question

Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs

(412)

$407.13

Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter

(641)

$15.16

Question:

If I purchase the above axle will I be able to use adjustable leaf spring mounting brackets to make up the difference between 74-inches spacing and 72 inches spacing center of the leaf spring? Thanks.

asked by: David

Expert Reply:

In order to change the spring center on the Trailer Axle with Idler Hubs # e65GR you will need to cut off the existing spring seats. Once they have been removed, you will need to have # TRSS238 welded on to match your 72" measurement. If you have some kind of adjustable bracket I do not recommend using it. There should be no way for the leaf springs to move horizontally along the axle aside from moving the spring seat.

expert reply by: Robin H