Recommended Compressor Kit For LoadLifter 7500 XL Air Springs On 2021 Ram 3500

Question

Question:

Looking for a compressor kit for the 7500xl bag kit

asked by: Bobby K

0

Expert Reply:

I recommend the Air Lift WirelessONE Compressor System for Air Helper Springs - Remote - Bluetooth - EZ Mount # AL25980EZ for leveling the Air Lift LoadLifter 7500 XL Air Helper Springs # AL57531 on your 2021 Ram 3500.

expert reply by: Bud M

0

Answer 1

Your understanding of how the air in the bags will operate is correct. If both bags are on one valve the air will shift from one to the other while turning with a heavy load. However, if the load is distributed evenly it will also return to even once…

view full answer...

Answer 2

The Air Lift LoadLifter 7500 XL Air Helper Springs part #AL57531 are what I recommend for a 2019 Ram 3500. These are heavy duty air bags rated for 7,500 lbs at 150 psi. They feature a bolt-on install which you can see in the install video I did…

view full answer...

Answer 3

I have an air bag solution for you. Unfortunately, if you have a 2022 Ram 3500 CA60 chassis cab, the Air Lift LoadLifter 7500 XL #AL57531 will not fit. This is because these air bags are only designed for standard pickup models. However, we do have…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 7

Hello Joe, Thank you for reaching out! The Power Mountain Tallboy Off-Road Bottle Jack - 11-5/16" to 27-1/16" Lift - 12 Tons #PM94FR does have the capacity you’d need, but since your fifth wheel’s frame sits about 25" off the ground,…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hey Robert congrats on the new truck! In bed hitch includes the puck system as well when it comes to fitment of the air bag kit brackets. For your 2026 Ram 3500 with the factory puck system, I recommend the Air Lift LoadLifter 7500 XL Air Helper…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

Hey Jim welcome back. To determine if you need the TorkLift Camper Anchor Relocation Kit item #TLA7004, you'll have to take a measurement. You'll want to measure from the front bumper of your Palomino HS2902 to the center of the rear anchor…

view full answer...

Answer 12

Hello Ken, thanks for reaching out. Sounds like you are on the right track here because the type of running boards on your truck do dictate which tie downs to use. You are also correct that you will not be able to use the tie downs from your old 2002…

view full answer...

Recommended Compressor Kit For LoadLifter 7500 XL Air Springs On 2021 Ram 3500

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching