Replacement Tailgate Seal For Pace Edward Tonneau Covers

Updated 07/08/2024 | Published 06/29/2022

Question:

Can I use a different tailgate top seal then the rubber one that comes with it I would like to put a aluminum one on fi can

asked by: Jamie

Expert Reply:

Right now, the only available tailgate seal that Pace Edwards offers is the rubber seal like the Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers # PE99CV.

This tailgate seal will fit the Pace Edwards Bedlocker, Full-Metal, JackRabbit, and the Switchblade tonneau cover.

expert reply by: Bryce D

James

7/3/2024

How do you install the Pace Edwards' Bedlocker tailgate seal?

Bryce D.

7/8/2024

@James To install the seal, you will need to start with the tonneau cover completely open. Then you'll need to remove the tonneau railing caps or stop blocks, the 2 hex screws at the tailgate of the tonneau rails and the rear clamps. Then, lift the end of the rail up to remove an inner screw that will reveal itself (one on each side) which can be removed with a Phillips head screwdriver. Set the rails back down on the bed rails and tighten the clamps back down and pull the cover beyond the tailgate end of the tonneau rails. You should then be able to slide the old seal off and slide the new seal on.