Replacement Toilet Seat for Dometic 320 Full-Timer RV Toilet

Question

Question:

Will a standard toilet seat from Home Depot fit this toilet?

asked by: Darby

1

Helpful Expert Reply:

Yes, the elongated ceramic bowl on the Dometic 320 Full-Timer RV Toilet, # DOM87FR matches the design of a residential toilet.

expert reply by: Michael R

1

Teresa

3/7/2024

We have a 320 elongated toilet and want a slow closing replacement seat….where do I go to buy one?

Mike L.

3/7/2024

@Teresa You can pick that up at your favorite hardware store. Make sure the replacement seat is for an elongated bowl.

Answer 1

Haha, I hear you there, Julie! The Thomas Payne Rest Easy Dellmead #TP49KR and TrFold Loveseat Cobblestone #LC54FC both use a woven fabric upholstery that’s soft, breathable, and great at hiding fur or everyday wear. It just doesn’t wipe down as…

view full answer...

Answer 2

Hey Edgar, so we have pretty similar designs to the part #TP48KR in different colors that are the same size. For darker we have #TP98KR More like a light gray #TP78KR Lighter tan #TP68KR Darker brown and leather #TP32KR

view full answer...

Answer 3

Hey Lonnie, we have the Thomas Payne Seismic Power Loveseat part #TP32KR that has seat surface dimensions of 44" long x 42" wide. Would that work for you?

view full answer...

Answer 4

Welcome back Jim, and thanks for all of the information. We've got a slow closing toilet seat that's going to be a perfect fit for your Dometic 310 pn 9108552772. It's the Replacement Wooden Toilet Seat with Slow Close Lid item #DOM83FR.…

view full answer...

Answer 5

The hinge itself is not available, but you can just replace the entire lid with the Replacement Wooden Toilet Seat with Slow Close Lid for Dometic Part-Timer RV Toilets #DOM23FR which would include two brand new slow close hinges.

view full answer...

Answer 6

To determine the correct replacement seat for your Dometic toilet we need to know the model number on your toilet. This information is found on the back of the toilet on the manufacturers label. Depending on the model it may be hidden behind a cover.…

view full answer...

Answer 7

The Curt #C17499 TruTrack is a great system, but it could rated a bit higher than what you actually need (depending on your actual as-towed trailer tongue weight). The system is designed for trailers with a fully loaded and ready to tow tongue weight…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Replacement Toilet Seat for Dometic 320 Full-Timer RV Toilet

Continue Researching