Can Buyers Products Hitch Plate 3371809065 Fit 2001 Chevy 3500HD Cab and Chassis Frame

Question

Question:

Yes from fuel tank to rear is twelve in

asked by: Scott

0

Expert Reply:

Are you saying you only have 12 inches of vertical room to work with to install the part # 3371809065? Or where exactly is the 12 inch limitation?

expert reply by: Jameson C

0

Scott

8/29/2019

Yes from fuel tank to rear is twelve in

Jameson C.

8/29/2019

I see what you mean now. The Buyers Products Hitch Plate with Receiver Tube # 3371809065 that you referenced will fit your setup. It's the right width for your 34 inch wide frame and is less than 12 inches in depth front to back where it would mount to the frame so in that regard it would also fit too.

Answer 1

The width of the tab you marked in your picture is 2.9" and the height is 6.32". I have attached the full dimensional drawing of the #3371809065 below for your reference.

view full answer...

Answer 2

The Buyers Products Hitch Plate with Pintle Mount to fit GM C4500/C5500 part #3371809039A measures 62-1/2" long edge to edge and 22" tall. It fits 3" frame widths. I have attached a diagram of all of the measurements of the pintle hook…

view full answer...

Answer 3

I checked with Buyers Products and the overall length of the Hitch Plate part #3371809065 is 62 inches, height is 17 inches and width is 7-1/4 inch. The weight is 102 lbs.

view full answer...

Answer 4

Yes we do; I have added a photo below for you of the dimensions of the Buyers Products Hitch Plate with 2" Receiver Tube - Ford #3371809060A.

view full answer...

Answer 5

As long as your truck originally was a cab and chassis model of truck before the dump bed was installed the Buyers Products Hitch Plate with Receiver Tube - Chevy/GMC #3371809065 that you referenced would fit and work well.

view full answer...

Answer 6

Since you have a C4500 the correct Buyers Products Hitch Plate with Pintle Mount would actually be the part #3371809039A as the #3371809065 is for the 3500 model trucks.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Can Buyers Products Hitch Plate 3371809065 Fit 2001 Chevy 3500HD Cab and Chassis Frame

Product Page this Question was Asked From

Continue Researching