Recommended 5th Wheel Trailer Hitch for 2005 Ford F-350 Super Duty

Question

Question:

5th wheel hitch for 2005 Ford 3500 diesel long bed. Not a dualy. want no movement in hitch/trailer. Not sure on weight will tow 26foot trailer

asked by: Lucia

0

Expert Reply:

Hands down the best 5th wheel hitch for your 8 foot bed, 2005 Ford F-350 Super Duty to haul a 26 foot 5th wheel, is the 18K B&W Patriot 5th Wheel Trailer Hitch, # BWRVK3255. Install this hitch using the B&W Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches, # BWRVK2400.

The B&W Patriot Hitch has a dual jaw design that offers a secure connection with 360-degree jaw-to-king-pin contact. It is assembled using durable polyurethane bushings to limit rattle and vibration. The cam-action latching handle helps prevent binding and provides a simple release even on unlevel terrain. It has a fully articulating head with 4 height settings to custom fit your application.

Please the linked installation video below.

expert reply by: Michael R

0

Answer 1

The Jensen Stereo #JWM60A most likely needs to be reset. The connections you mentioned are most likely causing issue if I understand correctly because you will only be able to use one input signal at any given time. If you are using the USB input,…

view full answer...

Answer 2

I spoke with MORryde and they stated the item number you were given does not match anything they have. Possibly it's the item number that the RV shop uses instead of the manufacturer number? Based on your photos it appears to me that you have a…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Recommended 5th Wheel Trailer Hitch for 2005 Ford F-350 Super Duty

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching