Combining Gen-Y Torsion Hitch With Equal-i-zer Weight Distribution Hitch System

Updated 06/13/2022 | Published 06/03/2022

Products Featured in This Question

Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 5" Drop/Rise - 10,000 lbs

(52)

$699.95

1-7/8" 12pt Shallow Socket - 3/4" Drive - Chromium-Vanadium Steel

(290)

$19.44

Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 10,000 lbs GTW, 1,000 lbs TW

(866)

$617.82

Gen-Y Torsion Weight Distribution Shank - 2" Hitches - 6-1/2" Drop/Rise - 1,100 lbs TW

(4)

$689.95

Question:

Although I am very happy with my Equal-i-zer W/D system, Im always looking to either simplify and/or improve. Now that I have an F350 I dont think I need the Equal-i-zers sway control. It would be nice to dispense with the heavy bars plus I figure my jack motor will get 1/2 of the use it does presently. On another forum four guys with Gen Ys say it does deliver a noticeably smoother ride. I take all testimonials with a pinch of salt but the design does intrigue me and it seems like it must soften a good percentage of the sharp bumps. The only downside I see is that the Gen Y is 20 lbs heavier. I often remove the hitch so that would be more bothersome. I think I will make a dolly to set it on to wheel it away.

asked by: Jason R

Expert Reply:

Rather than looking at separate systems you can use the Gen-Y Torsion Weight Distribution Shank # GY54FR to combine with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control # EQ37101ET. This will give you the smoother ride and retain the sway control and weight distribution you have with the Equal-i-zer hitch.

A Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers # 325-GH-1024 will not provide you with sway control that is best to have with large trailers.

The Equal-i-zer hitch will require a 1-7/8" 12pt Thin Walled Socket # ALL643216 to install the included 2-5/16" hitch ball that comes with the hitch.

expert reply by: Bud M