Is The Shocker Air Equalizer Overkill For A 600lb Tongue Weight Travel Trailer
Updated 05/17/2022 | Published 05/15/2022
Products Featured in This Question
Question:
Is this hitch an overkill for a 24 ft TT with a max weight of 5500 lbs? Tongue weight is 600 lbs. I am pulling it with a 4x4 F150 Sport 2.7 V6 turbo with a tow package, using a Husky Centerline WDH. I want to make the ride as comfortable as possible for cross country trips. The concrete roads can be dreadful unless speed is reduced to 50 MPH.
asked by: Randy
Expert Reply:
The Shocker Air Equalizer for Weight Distribution Hitch # SHK68VR was designed for up to 1,200lb tongue weight so your 600lb tongue weight will easily fall within range and wouldn't necessarily be overkill. The manufacturer does not give a specific psi rating and recommends starting with the air bag empty and filling it 5psi at a time until you feel comfortable with the ride quality.
Once properly inflated for your application the air bag will help minimize the bouncing you're feeling with your trailer but you can also help mitigate the bouncing by improving the suspension on your trailer.
I recommend going with the an upgrade like the SumoSprings Trailer Helper Springs # TSS-106-40 if your leaf springs are underslung or the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket # TSS-107-40 if your leaf springs are overslung.
If you have a tandem axle then I recommend installing a shock system like the Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers - 3,500-lb Axle # RM-2450. This system is designed to fit 2-3/8" diameter axles and will greatly reduce the trailer bounce, chucking, and porpoising that you have been experiencing.
Product Page this Question was Asked From
Shocker Air Equalizer for Weight Distribution Hitch - Set Up Kit - 2" Hitch - 12K
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1100 lbs TW
- Fits 2 Inch Hitch
- Air Equalizer
- Shocker Hitch
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What Is The Optimum Angle For Shackle Straps To Sit At On The Equalizer
- Q&A: Can Longer Shackle Straps be Added to Tandem Axle Trailer
- Q&A: What Diameter is a Dexter 4,000 lb Axle
- Q&A: How to Pick Out Correct Shackle Length for Trailer Suspension
- Q&A: Proper Position of Equalizer and Shackles on Trailer Suspension
- Q&A: Lift Kit Solution to Allow Fifth Wheel Trailer to Sit More Level When Towed
- Video: MORryde X-Factor Crossmember for Standard Frame Hangers Feature Review
- Video: An In-Depth Look at the MORryde X-Factor Crossmember for Standard Frame Hangers
- Video: Review of RV Ride Control Trailer Suspension Parts - Alignment and Lift Kits - RR23QX
- Video: Feature Breakdown: MORryde U-Bolts for 5,200-lb to 7,000-lb Round Trailer Axles
- Video: TruRyde Trailer Suspension TRSS300 Review
- Video: Measuring To Choose The Right Trailer Axle
- Video: Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks Review
- Shop: Mount-n-Lock Heavy-Haul'r Heavy Duty Replacement RV Bumper - 4" - 500 lbs - Brushed
- Shop: Dexter Trailer Axle w/ Electric Brakes - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter
- Shop: Correct Track Trailer Alignment and Lift Kit - Tandem Axle
- Shop: Gen-Y Torsion Weight Distribution Shank - 2" Hitches - 6-1/2" Drop/Rise - 1,100 lbs TW
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Shop: Replacement Dexter Bolt-On Shock Kit for 2-3/8" or 3" Diameter Axle - Single Axle
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Search Results: trailer wiring
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
on Accessories and Parts
