Parts Needed to Add Disc Brakes or EOH Brakes to Tandem 3,500 lb Axles on Boat Trailer
Published 05/17/2022 >
Products Featured in This Question
Question:
Hey Kyle, I'm looking at going with and electric over hydraulic system with disc brakes now. I see you have a kit with an electric actuator and disc brakes for 13 in, but I have the 10-in with five on four and a half. I assume I need a 1600 PSI actuator for a tandem trailer. Is there a kit you sell with those parts or do I need to purchase them separately?
asked by: Marc D
Helpful Expert Reply:
We can get both of your axles set up with disc brakes, and for 3,500 lb axles, since you are converting to disc brakes you'll need a hub-and-rotor disc brake assembly. For the correct kit, as well as the disc brake actuator and brake lines, here is everything you'll need (note for a tandem axle trailer you'll need two of the disc brake kits):
- Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet # K2HR35D
- Bearing Kit for Trailer Brakes w/ 8" or 10" Hub/Rotor - 3,500 lbs # DBRKHW35
- Titan Zinc-Plated Brake Actuator - Disc - 2-5/16" Ball - Bolt On - 8,000 lbs # T4747200
- Kodiak Hydraulic Brake Line Kit - Tandem Axle # 20TA-BLKIT
As for the prices, they can be found below where the products are listed, or on the product pages.
Product Page this Question was Asked From
Kodiak Hydraulic Brake Line Kit - Tandem Axle - 20'
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 20 Feet Long
- Brake Lines
- Flexible Brake Hose
- Brake Line Kits
- Tandem Axle
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Zinc-Plated Brake Actuator w/ Electric Lockout - Disc - 2-5/16" Ball - 8,000 lbs
- Shop: Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs - Oil
- Shop: Demco Hydraulic Brake Actuator w/ Drop and Electric Lockout - Disc - Zinc - 2-5/16" Ball - 8K
- Shop: Demco Hydraulic Brake Actuator w/ Drop - Disc - Zinc - 2-5/16" Ball - 8,000 lbs
- Shop: Hydrastar Disc Brake Kit w/ Actuator for Tandem Axle Trailers - 10" Rotor - 5 on 4-1/2 - 3.5K
- Shop: Demco Hydraulic Brake Actuator w/ Electric Lockout - Disc - Zinc - 2" Ball - 7,000 lbs
- Shop: Dexter Zinc-Plated Brake Actuator - Disc - 2-5/16" Ball - Bolt On - 8,000 lbs
- Video: Complete Breakdown of the Dexter Zinc-Plated Brake Actuator w/ Electric Lockout
- Article: How to Measure for Trailer Hitch Drop
- Video: Review of the Dexter Brake Actuator w/ Drop
- Q&A: Parts Needed to Convert 3,500 lb Trailer Axle to Disc Brakes
- Q&A: Can Demco Hydraulic Brake Actuator Electric Lockout # DM8750311 be Used on Tandem Axle Trailer
- Q&A: Surge Drum Brake To Surge Disc Brake Conversion On a 1995 Caulkins Tandem 3,500LB Axle Boat Trailer
- Video: Review of Hydrastar Trailer Brakes - Tandem Axle Disc Brake Kit - HYD22FR
- Search Results: sealed hubs
- Article: The Best Boat Bumpers
- Video: Titan Brake Actuators with Reverse Lockout Replacement Solenoid Valve Installation
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Comparing the HydraStar Hydraulic Actuator and the Titan BrakeRite Hydraulic Actuator
- Q&A: Recommended Surge Brake Actuator For 7800lb Tandem Axle Boat Trailer W/ Disc Brakes
- Video: An In-Depth Look at the Kodiak Disc Brakes
- Video: Let’s Check Out the Mounting Bolts and Hardware for 10" Brake Assemblies
- Q&A: Troubleshooting a Trailer with a Titan # T4747220 Brake Actuator
- Search Results: deemaxx trailer brakes
- Q&A: What Specific Bolt Size And Length Are Needed To Install The Demco Brake Actuator # DM72VR?
- Video: Review of Hydrastar Trailer Brakes - Tandem Axle Disc Brake Kit - HYD42FR
- Search Results: brake actuator
- Search Results: trailer brakes
- Search Results: hydrastar brake actuator





Marc D.
5/17/2022
Hey Kyle, I'm looking at going with and electric over hydraulic system with disc brakes now. I see you have a kit with an electric actuator and disc brakes for 13 in, but I have the 10-in with five on four and a half. I assume I need a 1600 PSI actuator for a tandem trailer. Is there a kit you sell with those parts or do I need to purchase them separately?