How to Order Pair of T-Handle Lock and J327 Keys for Truck Cap

Question

Question:

I need a pair of matching lock handles J327 with keys? How do I order them?

asked by: Paul K

0

Expert Reply:

The Bauer Products T-Handle Lock for Truck Caps # BA77VR comes with a J327 key like what you're needing so you'll just change the quantity of this T-Handle lock to "2" prior to adding it to your cart and checking out. This gives you a pair of the T-Handle Lock as well as a pair of the J327 key.

expert reply by: Jon G

0

Answer 1

Like you said, most trailers in the US have what is called a 2-wire or combined system with the turn signals and brake lights on the same circuit. You would not tap into the tow package wiring if you need just a brake light signal. There is a…

view full answer...

Answer 2

For one truck cap handle that operates counterclockwise and one handle that operates clockwise, I recommend the following parts: - Bauer Products T-Handle Lock for Truck Caps - Counterclockwise - Gloss Black #BA37VR - Bauer Products T-Handle Lock for…

view full answer...

Answer 3

Hello Dan. Great question. So the Bauer Products T-Handle Lock for Truck Caps - Clockwise - Gloss Black #BA47VR that you were looking at comes keyed to K-127. So if you were to purchase more of the #BA47VR they would all be keyed to K-127. We have…

view full answer...

Answer 4

Yes, since you can choose the handle based on the key it is possible to have the clockwise and counterclockwise Bauer Products T-Handle keyed alike. The #BA87VR and the #BA77VR both use the J-327 key so you can have matching locks on the handles.

view full answer...

Answer 5

I have some part recommendations for you as the Dexter 8-283 hub is obsolete. This used a spindle which is also obsolete. I recommend having a new axle put on as it will be easier to upgrade your axle than having new spindles, brakes and hubs…

view full answer...

Answer 6

The Dexter 8-283 is an obsolete 2800lb 10 x 1-1/2 inch hub that used a LM67048 inner and a L44649 outer bearing. Unfortunately, we don't have any hubs that would be compatible with the spindles on your axle. Your best bet at this point would be…

view full answer...

Answer 7

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

How to Order Pair of T-Handle Lock and J327 Keys for Truck Cap

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching