Solution for Over-Under Conversion Kit on Lowes 4 x 6 Carry-On Trailer
Updated 04/19/2022 | Published 04/18/2022 >
Products Featured in This Question
Question:
Just picked up a 4x6 Carry-On Trailer from Lowes the other day, and Im looking to get a little more ground clearnence with a Straight Axle Overslung conversion. With the end game to turn this into an adventure trailer with RTT. Scouring the internet for information on the current axle size to get a better idea on which kit to use. Seems like a straight forward process but any insight on what you can offer would be greatly appreciated. Was referred by a friend to check yall out. Thank.
asked by: Tyler Y
Expert Reply:
In order to determine the correct kit for your trailer I recommend measuring the diameter of your axle. The # K71-384-00 is for a 2-3/8" axle. More than likely you have a 2,000 lb axle with a 1-3/4" diameter. You will need to confirm this. Although there is no kit available for this axle diameter you can put one together.
What you need is the U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts # APUBR-10 along with the Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1 # TRSS175. Using these together will allow you to flip the axle just like you would with the Dexter kit and gain the additional clearance you're looking for.
Product Page this Question was Asked From
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 2-3/8 Inch
- Single Axle
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Search Results: tongue mount spare tire
- Shop: U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
- Search Results: spare tire mount
- Q&A: Is There An Axle Flip Kit for a 2,000 Lb 1-3/4 Inch Diameter Axle
- Search Results: trailer kickstand
- Search Results: trailer jack
- Video: CE Smith Spare Tire Carrier for Trailers Review
- Video: CE Smith Spare Tire Mount for Trailers Review
- Video: All You Need to Know About the Optronics LED Trailer License Plate Light
- Q&A: Options For Increasing Fender Clearance On A Single Axle Trailer
- Shop: Kenda Karrier KR53 ST175/80R13 Radial Trailer Tire with 13" Silver Mod Wheel - 5 on 4-1/2
- Search Results: trailer fenders
- Q&A: Is There a Over Under Kit for a 1-3/4 Inch Axle?
- Search Results: fenders
- Search Results: trailer tongue stand
- Shop: Kenda K371 Bias Trailer Tire - 4.80/4.00-8 - Load Range C
- Shop: Kenda Loadstar K371 Bias Trailer Tire - 4.80/4.00-8 - Load Range B
- Shop: Karrier ST175/80R13 Radial Trailer Tire with 13" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Video: Ultra-Fab Folding Spare Tire Mount for Trailers and RVs Review
- Q&A: Will These Single-Axle Trailer Fender part # HP79VR Install on my 5x8 Barron Trailer
- Video: Review of Tie Down Trailer Fenders - Top and Side Step Plastic Fender Black - TD86VR
- Video: A Closer Look at the U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles
- Q&A: Parts Needed To Lift A 5' x 8' Carry-On Trailer
- Q&A: Can a Pole Tongue Trailer Be Converted To A-Frame and Strengthen The Frame?
- Q&A: Can 12 Inch Trailer Tires and Wheels be Replaced with 13 Inch
- Article: How to Raise Your Travel Trailer Height
- Video: All You Need to Know About the Dexter Trailer Springs Over-Under Conversion Kit
- Shop: Suspension Enhancement



