Will These Single-Axle Trailer Fender part # HP79VR Install on my 5x8 Barron Trailer

Updated 04/25/2011 | Published 04/23/2011

Question:

I have a barron 5x8 trailer. It had jeep fenders bolted on. I can not find these fenders with backing foer 13 inch tires. Will this fender bolt on with drilling a few holes? Old fenders 8 wide,8 tall, 24 wide, rims 13 inches. Any info will help. Thanks

asked by: Paul L

Expert Reply:

Yes, these 16-Gauge Steel, Single-Axle Trailer Fender, part # HP79VR, should bolt up to your Barron 5x8 trailer after you drill a few holes it it. This fender is for wheels that are 13-14 inches like what is on your trailer.

The dimensions of this fender are 7-3/4 inches wide x 28 inches long x 10 inches tall. Compared to the measurements of your old fenders this should work very well for you. However, it looks like this fender will be 1/4 inch thinner in width, 4 inches longer in length. As long as that does not cause a clearance issue for you these fenders should work very well for you.

expert reply by: Jameson C