Replacement Bearings, Races and Grease Seal For a 1-3/8" Straight Spindle
Updated 04/11/2022 | Published 04/10/2022
Products Featured in This Question
Question:
I have a trailer with an inner bearing stamped L68149 and an outer bearing with L68149 bearing. It is an Easy lube spindle. Is there a kit for this?
asked by: James K
Expert Reply:
We will have all the replacement bearing parts you will need as we do not have a bearing kit with all the parts you need. First we have the Bearing # L68149 and its corresponding Race # L68111. It is likely that your spindle will use the Grease Seal # 58846 but you should verify your measurements (ID 1.719" / OD 2.565") with your current seal. We also have the Tang Washer # 5-101 for a 1" diameter spindle nut.
The Seal Puller # PTW1219 and 7-Piece Installation Set # PTW83020 will aid in the removal and installation of the components on your hubs.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.38 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Holiday 2025 | Staff Picks for Real-Life Adventures
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Will Dexter Premier Disc Brake Kit Fit Calkins Tandem Axle Boat Trailer
- Q&A: Will The etrailer Hub AKIHUB-545-35-G-EZ-K Fit A 10 Inch Wheel?
- Article: Trailer Wiring Diagrams
- Q&A: What Is The Difference Between Timbren xle-Less Trailer Suspension T54KV And TASR5200S03?
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Grease Seal Recommendation to Replace AD2527E
- Q&A: Replacement Boat Trailer Seal for a NOK AD2527E Grease Seal
- Q&A: Replacement Idler Hub for a Dexter 3,500 lbs Axle