Can Wheel Masters 2-Hose Inflation Kit # WM8009 Fit 2002 Ford F-350 Dually Wheels

Question

Question:

My 2002 Ford F-350 has dual factory aluminum wheels. Wheel cut outs are not oval, more of a triangle. Will these mounting clips work on these wheels?

asked by: Dennis G

1

Helpful Expert Reply:

As long as the widest portion of the hole in the dually wheels of your 2002 Ford F-350 is 5-7/8 inches the Wheel Masters 2-Hose Inflation Kit - 16 to 19-1/2 Inner Dually - Hand Hole Mount Item # WM8009 will fit and work great.

expert reply by: Jameson C

1

Answer 1

You were on the right track- the Wheel Masters 2 Hose Inflation Kit #WM8009 are designed for 16" to 19-1/2" wheels like the ones on your Winnebago Access and will work with TPMS systems. The 7-1/2" hose length is going to supply you…

view full answer...

Answer 2

Hey Tim, the best option for SumoSprings that fits your 2023 Entegra 24b that is built on a 2023 E450 Class C chassis would be the part #SSR-106-40-1 for the rear and then part #SSF-106-47 for the front. Another thing that will make a huge…

view full answer...

Answer 3

Hi Jeff, I can give you a hand here with suspension upgrades for your 2023 Jayco Greyhawk 27U, though honestly I'd go a different route than the Timbrens #TFEF350 and #TFERSD you mentioned. They'll do their job, but my goodness they can be…

view full answer...

Answer 4

I checked with all of our vendors and I am sorry but no one has made a front hitch for the 2023 Ford E-450. The only options I have available would be to use a universal weld-on hitch like item #41990-07 or to have a hitch fabricated. If you choose…

view full answer...

Answer 5

The 135 degree hoses are not offered separately from the Wheel Masters 4-Hose Inflation Kit unfortunately. I wish I could tell you exactly what you need but these are not vehicle specific parts, they are universal therefore up to the installer to…

view full answer...

Answer 6

For the inner wheel of your dual rear wheels I recommend the Wheel Masters 2-Hose Inflation Kit - 16" to 19-1/2" Inner Dually #WM8009. These valve extenders are designed to mount into the handholes of your wheels (pictured below) for an…

view full answer...

Answer 7

Thanks for the pictures, I can see why you're concerned now. It looks like you have some 135 degree valve extenders that just aren't quite long enough to pass through the hand holes of the wheel cover. You could try using a longer 180 degree…

view full answer...

Answer 8

Hello Gary, thanks for reaching out. TireMinder does not list a specific hole size for the 2-Hose Inflation Kit #TM27SR. I did run out to our warehouse and measured the brackets. They are about 5-1/2" long from where they clip on, so that should…

view full answer...

Answer 9

What is the width of the wheel? In order to determine what offset you have I would need to know the current width so I can see what your 4.5 inch dimension indicates. A zero offset means the hub face dimension is perfectly centered so I would need…

view full answer...

Answer 10

It really depends on your setup, if the safety chain loops on your tow vehicle are spaced far apart then you will need more slack to make a tight turn then if they were closer together. What I would recommend you do is connect your trailer to your…

view full answer...

Answer 11

I definitely understand how safety chain capacities and determining exactly what chain rating you need for your trailer can be a bit confusing. To keep it as simple as possible, safety chain requirements state that the breaking strength of EACH…

view full answer...

Can Wheel Masters 2-Hose Inflation Kit # WM8009 Fit 2002 Ford F-350 Dually Wheels

Product Page this Question was Asked From

Continue Researching