Where is etrailer Hitch Lock e98881 Made

Question

Question:

Where are your trailer locks manufactured and assembled?

asked by: Tom H

0

Expert Reply:

The etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches - Flush - 3-5/8" Span - Chrome # e98881 is made in the USA. Assembled too.

expert reply by: Kyle S

0

Answer 1

Trailer Hitch Pins like the etrailer Trailer Hitch Receiver Lock for 2" Hitches - Flush - 2-5/8" Span - Chrome #e98880 and #e98881 you were looking at do not have a specific weight rating due to them being so much stronger than the rest of…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

Hello Matt, I was seeing some mixed information on this as well, so I reached out directly to my contact at Firestone to confirm. The Firestone Ride-Rite Air Bags w/ Easy Mount Compressor - Wireless Control - Single Path - 5,000 lbs #F44XV will fit…

view full answer...

Answer 6

Hey Bob, I can definitely help! I would recommend the Firestone Ride Rite Air Bag Kit #F44XV as it's an all in one kit for an air bag kit and compressor system for your 2023 Ford F-250 that would give you the best air bags as well as a really…

view full answer...

Answer 7

Hey Don, thanks for reaching out! The correct fit for your 2024 Ford F-250 with the Tremor package is the Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR. I confirmed with my contact at Hellwig that this will fit specifically with your Tremor…

view full answer...

Answer 8

Hi David, I just want to make sure we're talking about the same type of hitch. The B and W Conversion Hitch part #BW55RV is designed to replace the pin box on a fifth wheel trailer and convert it to a gooseneck connection. Since your 2022 ATC…

view full answer...

Answer 9

Hello Travis, thanks for reaching out. No, the Curt T-Connector Vehicle Wiring Harness #C69CR is not going to be long enough to reach from the factory 7-way to the back of the bed on a 2022 Ford F-350. If you need to add a 7-way to the bed, you will…

view full answer...

Answer 10

The B&W Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches - 10 Bolt #BWRVR3200 will fit your 2018 Ford F-250 with aluminum bed but B&W doesn't recommend it. You will want to use some sort of spacers/isolators that…

view full answer...

Answer 11

Hey Ken! The Timbren Suspension Enhancement System #TFR250SDJ is 6-7/8" tall. The actual jounce spring is 4-1/2" by itself. See the attached photo. These are designed to fit the 2024 Ford F-250 at stock ride height. If you have a lift you…

view full answer...

Answer 12

If the truck bed of your Ford F250 has 4 pucks like what is in the picture I attached then your truck has the underbed hitch prep package and the Reese Elite Series Pre-Assembled 5th Wheel Hitch w/ Slider #RP30144 would be the correct hitch for your…

view full answer...

Where is etrailer Hitch Lock e98881 Made

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching