Recommended Torflex Lift Kit For Tandem 2,900lb Dexter Torflex Axles

Question

Question:

Im looking for lift kit from my 2013 Lance 2185 travel trailer. It has 3825 base wt and Dexter Torflex Axles SC150-45, 2900lbs capacity each axle.

asked by: Bennett

0

Expert Reply:

Based on the information that you provided for your axles the Torflex Lift Kit - Tandem Axle - 2-5/8" Lift # K71-707-02 is going to be the correct lift kit.

expert reply by: Kevin C

0

Answer 1

Hey Tracy, The amount of sensors a SeeLevel monitor can connect to depends on the model of the monitor. Each one is set to handle a certain amount of tanks and you can also stack a second sensor on each tank for increased height/monitoring on taller…

view full answer...

Answer 2

We have wheels for your 205/75-14 trailer tire, and that size tire fits 14" x 5" or 14" x 5-1/2" wheels, which is great because it will save you some money. There are a couple options for the most budget-friendly 14" diameter…

view full answer...

Answer 3

Hey Tim, thanks for reaching out! I'd be more than happy to help you! I recommend checking out the DeeMaxx Stainless Steel Trailer Wheel Lug Nut #DE55KR since it's one solid piece and has that nice stainless coating. It's a simple…

view full answer...

Answer 4

When it comes to a 205/75R14 trailer tire like the Kenda, #AM10234, this size of tire will fit a 5", 5-1/2", 6", or 6-1/2" rim. I spoke with our in-house tire expert and he said that when it comes to choosing a rim for a trailer…

view full answer...

Answer 5

The Goodyear Endurance ST205/75R14 Radial Tire #724864519 paired with the 14" White Spoke Wheel #AM20352 from Dexstar comes with a rubber valve stem and if you wanted to add Americana Metal, Bolt-In Valve Stem #AM20906 you certainly could. This…

view full answer...

Answer 6

Thank you for your axle serial number. I was able to use this to determine that you need an L68149 inner and L44649 outer bearing along with a 10-19 grease seal. For a complete kit we have the Bearing Kit for #84 Spindle part #BK2-100. If you want to…

view full answer...

Answer 7

We have the Americana valve stem part #AM20906 which is a metal valve stem that fits valve stem hole in trailer wheels that are either .453 and .625 inch. These two sizes basically cover all trailer wheels. The valve stem can also handle over 100 psi…

view full answer...

Answer 8

I spoke to my contact at Lippert and they confirmed that the Electric Tongue Jack #LC285318 does not require any grease maintenance. Therefore they didn't include a grease zerk, what you can do is use a spray lithium grease and spray up the inner…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Recommended Torflex Lift Kit For Tandem 2,900lb Dexter Torflex Axles

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching