How Can I Reduce The Bouncing On My 12 Foot V-Nose Cargo Trailer
Published 03/18/2022
Products Featured in This Question
Question:
I have 4 3/4inch from the top of the leaf spring plate to the bottom of the trailer frame. Will I have to cut the sumo springs to make them fit? My frame where the springs will touch is only 2inch wide square tubing. Will I have to mount a plate to the bottom of my trailer frame to support the sumo springs.
asked by: Carroll J
Expert Reply:
You can eliminate the bounce in your trailer and smooth your ride with the addition of Sumo Springs. You will have two options, depending on how your leaf springs are mounted on your trailer.
If your leaf springs are underslung, meaning they are under the axle of your trailer, I recommend the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 3K to 5K - Underslung, part # TSS-106-40.
If your leaf springs are overslung, meaning they are over the axle of your trailer, I recommend the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 3K to 5K - Overslung, part # TSS-107-40.
I have included product description links and video demo links below.
(click to enlarge)
Product Page this Question was Asked From
SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 3K to 5K - Underslung
- Trailer Suspension Parts
- Leaf Spring Enhancement System
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- 3000 lbs
- 4000 lbs
- 5000 lbs
- Single Axle
- SuperSprings Intl
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: shocks
- Search Results: vehicle suspension
- Shop: SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 3K to 5K - Underslung
- Shop: SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 3K to 5K - Overslung
- Shop: Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 5,200-lb to 7,000-lb (3") Overslung Axle
- Shop: 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Shop: 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Shop: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 25-1/4" Long
- Shop: Replacement Dexter Bolt-On Shock Kit for 2-3/8" or 3" Diameter Axle - Single Axle
- Search Results: sumo
- Video: All About the 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles
- Video: Let’s Check Out the CE Smith U-Bolt Kit for Mounting Round Trailer Axles
- Q&A: Suspension Enhancement Options for 2021 Salem FSX 178BHSKX With Single Underslung Axle
- Search Results: 205/75~14 trailer tires and wheels
- Search Results: cargo basket
- Video: Hands-On with the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket
- Q&A: Can I Use 4,000 lbs Springs to Replace 3,500 lbs Leaf Springs?
- Video: SumoSprings Trailer Helper Springs w/ Line Relocation Bracket Spec Review
- Q&A: Could SumoSprings for Trailer Suspension be Trimmed Down
- Q&A: What Is The Difference Between The etrailer e54SR And Dexter DX23CR Leaf Springs?
- Video: How to Set Up Your Inno Truck Bed Cargo Rack on a 2021 Ford Ranger
- Video: Install: Inno Truck Bed Cargo Rack on a 2020 Toyota Tacoma
- Q&A: Where are the Taskmaster Steel Modular Trailer Wheels Manufactured
- Q&A: Can You Trim SumoSprings Trailer Helper Springs SS26MV & Will They Still Work
- Q&A: SumoSprings for KZ Sportsmen Dual Axle Travel Trailer
- Search Results: sumo spring
- Search Results: sumo springs for trailer
- Video: SumoSprings Trailer Helper Springs Manufacturer Demo
- Shop: Vehicle Air Mattress
- Article: How to Tell the Weight Rating of a Trailer Axle
Carrol
3/18/2022
I have 4 3/4inch from the top of the leaf spring plate to the bottom of the trailer frame. Will I have to cut the sumo springs to make them fit? My frame where the springs will touch is only 2inch wide square tubing. Will I have to mount a plate to the bottom of my trailer frame to support the sumo springs.