Can New Brackets Be Used To Change Air Lift Air Bags From a 2016 F-250 to a 2019 F-250?

Question

Question:

i have airlift 5000 kit i had in my 2016 f250 have new truck 2019 f250 as far as I can tell I need upper brackets and hardware for upper brackets to make kit work for new truck

asked by: Sean M

0

Expert Reply:

To be able to determine if your current air lift kit on your 2016 Ford F-250 will be able to be used on your 2019 I will need to know exactly what system you have as there are some slight differences between some Air Lift kits.

My recommendation is to install an entire new kit like the Air Lift LoadLifter 5000 Ultimate # AL88399 on your new 2019 Ford F-250. Once you remove the air bags from their original vehicle you no longer will have any warranty on the hardware or air bags. A new kit will allow you to maintain the manufacturer Lifetime warranty on your vehicle.

expert reply by: Bud M

0

Answer 1

Hey Ted, yes the Westin HDX grille guard aprt #W32YC would block the sensors and camera on your 2025 Ford F-350. I wish there was a way around that but since modern truck all have so many sensors these guards do interefere.

view full answer...

Answer 2

Hey Willyd, it looks like you have a 7-way round connector which is a bit more rare and for that we only have a 7-way to 4-way adapter like the part #47405. Does your trailer with a 5-way actually use the 5th circuit? If so what is it for?

view full answer...

Answer 3

It really depends on the dimensions of the aux fuel tank you have. The canister that mounts on the front of the RetraxPRO MX #RT80233 is 11-5/8 deep by 13-3/4 inches long and will sit at the very front of the truck bed which could fit over a tank but…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Answer 10

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 11

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 12

Hey Jerry, thanks for reaching out. The short answer is yes, probably but it really depends on your exact setup. When you slide the Companion back, you gain cab clearance but lose space at the tailgate, and with a MorRyde pin box being a bit bulkier,…

view full answer...

Can New Brackets Be Used To Change Air Lift Air Bags From a 2016 F-250 to a 2019 F-250?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching