Replacement for Al-Ko 405076.9 Trailer Axle
Published 02/04/2022 >
Question:
Hello, My name is Sam from Bishs RV in Cheyenne WY. I had a customer that has an axle that needs replaced with the AL-KO part 405076.9. I also have pictured of the axle that the customer has sent me. I was wondering if the axle you have on your website, # T3584F-EZ-8974 would be a compatible axle for that unit? Thanks!
asked by: Sam G
Expert Reply:
I couldn't find any information about that particular axle online, likely because AL-KO hasn't been around for a number of years.
The Dexter Axle # T3584F-EZ-8974 you specified is a 3500 lb axle with a hub face to hub face distance of 89 and 74 inches center to center between the spring seats.
If the existing axle has the L68149 inner/L44649 outer wheel bearings and has the hub face and spring center dimensions mentioned above, the # T3584F-EZ-8974 would be the correct replacement axle.
If the existing axle is of a different capacity, or has different hub face or spring center measurements, let me know the capacity and those dimensions and I'll see if we offer something that will work.

Product Page this Question was Asked From
Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Valterra Waste Valve Body w/ Flexible Cable for RV Black Water Tank - 120"
- Video: Standard Axle Brake Assembly Hub and Drum Installation FAQ
- Shop: Bauer NE RV Entry Door Lock for Trailers - Bluetooth - Right Handed
- Q&A: Is there a Replacement Dexter Axle that Fits in Place of a 3,500 Pound Lippert Axle
- Shop: Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Shop: Bauer Products Motorhome Door Lock - Black
- Shop: Lippert Replacement Motor Harness for RV In-Wall Slide-Out - 25' Long
- Shop: Lippert Hall Effect Sensor-to-Control-Board Harness
- Shop: Replacement Hall Effect Sensor Wire Harness for Lippert Ground Control 3.0 - Rear Driver's Side
- Q&A: Troubleshooting An E3 Error Code On A Furrion Air Conditioning System
- Q&A: Lookiing To Upgrade Axles On 2015 Keystone Cougar 33RBK
- Q&A: Does It Matter If the Spring Center and Hub Face Is Different When Replacing A Trailer Axle
- Q&A: How to Determine if Trailer Axle e73SR Can be Used as Replacement
- Q&A: Upgrading to 6k Axle on 2019 Grand Design Relfection 28BH
- Q&A: Replacement Axle Options For AL-KO 4,400LB Axles w/ 85" Hub Face, 6 on 5-1/2" Bolt Pattern w/ Brakes