What Hubs do I Need for My 1998 Calkins Boat Trailer?
Updated 02/01/2022 | Published 01/25/2022
Products Featured in This Question
Question:
Here is the inspection plate for my 98 calkins trailer. I have 5bolt 4and half inch hub, will this narrow down to which hub I need to order.
asked by: Wcjohnson
Expert Reply:
If both of your inner and outer bearings are # L44649, you most likely have a 2K axle. Depending on your bolt pattern, I recommend the following hubs:
- Trailer Idler Hub Assembly for 2,000-lb Axles # AKIHUB-545-2-G-2K (5 on 4-1/2 pattern)
- Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 # 8-91-05UC1 (4 on 4 pattern)
If you need the hub/drum combination, I recommend the following:
- Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 # AKHD-545-2-2K (5 on 4-1/2)
We unfortunately do not have any hub/drum assemblies at a 2,000 pound capacity, but we do have the Dexter Trailer Hub and Drum Assembly for 2,200-lb Axles - 7" Diameter # 8-173-16UC3 that will do the trick.
If you happen to have different capacity axles, please feel free to respond to this answer with the capacity you have on your axles.
(click to enlarge)
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: brake mounting flange
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Search Results: trailer brake controller
- Search Results: grease seal 125 id
- Search Results: grease seal
- Shop: Brake Controller
- Video: In-Depth Review of the Dexter Hydraulic Trailer Brake Kit
- Video: DIY Installation for the etrailer Galvanized Trailer Idler Hub Assembly for 2,000-lb Axles
- Shop: Dexter Hydraulic Trailer Brakes - Uni-Servo - 7" - Left/Right - 2.5K
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Video: Feature Breakdown: Trailer Spindle Nut 1"
- Video: In-Depth Review of the Spindle Nut for Axles with 7/8"
- Video: Titan Brake Actuators with Reverse Lockout Replacement Solenoid Valve Installation
- Search Results: cotter pin
- Search Results: castle nut
- Shop: CE Smith Trailer Axle Beam with Standard Spindles - Galvanized - 57-1/2" Long - 1.8K
- Video: Review of the Dexter Trailer Hub and Drum Assembly for 2,000-lb E-Z Lube Axles
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Search Results: hub washer
- Shop: Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 - L44649 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Dexter Trailer Hub and Drum Assembly for 2,000-lb Axles - 7" - 5 on 4-1/2
- Shop: etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Shop: Spindle Nut for Axles with 7/8" - 14 Castle Nut
- Video: Comprehensive Review: Dexter Trailer Hub and Drum Assembly for 2,000-lb E-Z Lube Axles
- Q&A: Recommended Parts To Add Hydraulic Trailer Brakes To 2014 Shorelander Trailer For 20 Pontoon
- Q&A: Parts Needed To Add Electric Drum Brakes To 1994 Jayco Pop-Up
- Q&A: Can 3,500 Lb Hub be Used to Replace 2,000 Lb Hub with Same Size Bearings
- Q&A: Determining Replacement Hub for Boat Trailer with H-1062-1 Printed on Back of Hub
- Q&A: Replacement Hub With L44649 Bearings on Tracker Boat Trailer
William J.
1/1/0001
Here is the inspection plate for my 98 calkins trailer. I have 5bolt 4and half inch hub, will this narrow down to which hub I need to order.